Admin Tab - User Authentication; Figure 5-63: Admin - User Authentication - Linksys SRW2008 User Manual

WebView Switches
• Authentication. Indicates the packet is authenticated.
• Privacy. Indicates the packet is both authenticated and encrypted.
UDP Port. Displays the UDP port used to send notifications. The default is 162.
Filter Name. Indicates if the SNMP filter for which the SNMP Notification filter is defined.
Timeout. Indicates the amount of time (seconds) the device waits before resending informs. The default is 15
seconds.
Retries. Indicates the amount of times the device resends an inform request. The default is 3 seconds.
The Add to List button adds the Notification Recipient configuration to the relevant table at the bottom of the
screen.

Admin Tab - User Authentication

The User Authentication screen is used to modify user passwords.
Authentication Type. Defines the user authentication methods. Combinations of all the authentication methods
can be selected. The possible field values are:
• Local. Authenticates the user at the device level. The device checks the user name and password for
authentication.
• RADIUS. Authenticates the user at the RADIUS server.
• TACACS+. Authenticates the user at the TACACS+ server.
• None. Assigns no authentication method to the authentication profile.
User Name. Displays the user name.
Password. Specifies the new password. The password is not displayed. As it entered an "*" corresponding to
each character is displayed in the field. (Range: 1-159 characters)
Confirm Password. Confirms the new password. The password entered into this field must be exactly the same
as the password entered in the Password field.
The Add to List button adds the user configuration to the Local User's Table.
Chapter 5: Using the Web-based Utility for Configuration
Admin Tab - User Authentication

Figure 5-63: Admin - User Authentication

81