Denon D-107 Operating Instructions Manual page 16

ENGLISH
(3) Giving names to preset stations
Be sure to set the current time beforehand.
2
Names of up to 11 characters can be given to preset stations.
2
TONE/SDB DISPLAY ENTER MENU
2, 9, 12
4, 6, 7,
8, 10
STOP PLAY/PAUSE
/BAND
VOLUME
PRESET
+
3, 5, 8
-
MUTE FUNCTION
8
TUNING
1 Perform steps 1 and 2 under
"Listening to preset stations" above
to display the preset number of the
station to which you want to give a
name.
2 Press the MENU button.
MENU
3 Press the +/ buttons to
select "Tuner Mode".
MENU
4
Press the ENTER button.
MENU
5
Press the +/ buttons to
select "StationName".
MENU P.SET
16
6 Press the ENTER button.
• The character input mode is set.
MENU P.SET
7
Press the ENTER button
again.
8 Press the +/ buttons to select a
character, then press the ENTER or
button to enter that character.
7
PRESET
+
ENTER
-
MENU
• The selected character is entered, the
cursor moves to the next place and the unit
is set to the next character input standby
mode.
PRESET
MENU P.SET
+
-
The character switches as follows each
time the + button is pressed. (Display
order) (The character switches in the
opposite order when the
pressed.)
ENTER
space
To correct a character you have
already input, press the
button to move the cursor to
the character you want to
PRESET correct, then select the new
+
character.
After inputting the last
9
-
character you want to input,
press the MENU button.
• The preset number selected in
step 1 flashes.
10 Press the ENTER button.
• "StationName" is displayed after
the name you have input is
displayed.
11 To continue giving names, press the
ENTER
+/ buttons after step 6 to display the
preset number of the station to
which you want give a name, then
perform steps 7 to 10.
12 Press the MENU button to
complete the setting.
ENTER
• The "MENU" indicator turns off.
To cancel the operation in the middle, press the
MENU button before performing step 9.
or
button is
6
MENU
(4) Listening to Preset Stations
ENTER
[Example] Listen to the station of preset number "3"
that was set in step (2).
PERSONAL AUDIO SYSTEM / CD RECEIVER
ON / STANDBY
FUNCTION 2 / BAND
1 2
MENU
PROG /
DIRECT
1 2 3
CALL
4 5 6
2
CLEAR
7 8 9
RANDOM REPEAT
10 +10
TIME TITLE FOLDER SLEEP
TONE/SDB DISPLAY ENTER MENU
STOP PLAY/PAUSE
/BAND
VOLUME
PRESET
+
2
-
MUTE FUNCTION
TUNING
1 Press the FUNCTION
button and set the
function to
"TUNER".
(Main unit)
2
Either press the +/ buttons to select
the preset number or press the
number buttons "3" to display
"Preset03".
PRESET
+
-
(Main unit) (RC-909)
To display the preset number, press the CALL
button while listening to a preset station.
VOLUME
1
FUNCTION
FUNCTION
(RC-909)
3
or
(RC-909)