Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Denon Manuals
  4. Stereo System
  5. D-107
  6. Service manual

Denon D-107 Service Manual

Hi-fi personal component system
Hide thumbs Also See for D-107:

Advertisement

Quick Links

Download this manual
For U.S. & Canada model
Hi-Fi Personal Component System
SERVICE MANUAL
D-107
MODEL
PERSONAL AUDIO SYSTEM
Some illustrations using in this service manual are slightly different from the actual set.
16-11, YUSHIMA 3-CHOME, BUNKYOU-KU, TOKYO 113-0034 JAPAN
Telephone: 03 (3837) 5321
X0133 205 NC 0112

Advertisement

loading

Related Manuals for Denon D-107

Summary of Contents for Denon D-107

  • Page 1 For U.S. & Canada model Hi-Fi Personal Component System SERVICE MANUAL D-107 MODEL PERSONAL AUDIO SYSTEM Some illustrations using in this service manual are slightly different from the actual set. 16-11, YUSHIMA 3-CHOME, BUNKYOU-KU, TOKYO 113-0034 JAPAN Telephone: 03 (3837) 5321...

  • Page 2: Safety Precautions

    D-107 SAFETY PRECAUTIONS The following check should be performed for the continued protection of the customer and service technician. LEAKAGE CURRENT CHECK Before returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassis resistance check.

  • Page 3: Rear Panel

    D-107 DISASSEMBLY (Follow the procedure below in reverse order when reassembling) Note: This system has a feature to back-up various settings such as function selected, volume level, etc. By performing disassembly or checking of the system, this back-up function can be a cause of error, and the system may not work normally when power on after re-assembling.
  • Page 4 D-107 Cable 2. Main P.W.B. 1) Disconnect connector and cable Connector 2) Remove 4 screws 3. I/O P.W.B. I/O P.W.B. 1) Remove 2 screws 4. Door Panel 1) Turn the pulley counter-clockwise to open the Door about 10mm horizontally. Note: Be careful not to disengage or twist the belt.
  • Page 5 D-107 5. Top Panel Top Panel 1) Open rear of the Top Panel in the arrow direction (A). 2) Pull it out horizontally as shown in the arrow direction (B). 6. Control P.W.B. 1) Remove 2 screws to separate the Top Panel and Tact Knob Bracket.
  • Page 6 D-107 8. Display P.W.B. 1) Remove 2 screws 2) Detach the P.W.B. with lifting as shown and sliding in the arrow direction. Display P.W.B. 9. OP/CL SW P.W.B., Play P.W.B. 1) Remove 1 screw 2) Detach the P.W.B. by moving to the arrow direction.
  • Page 7 D-107 TR MECHA SUB ASS'Y DISASSEMBLY Remove 4 Cut Washers and 2 Slide Cams on both sides of the Mecha. Slide Cam Cut Washer Slide Cam Cut Washer Disconnect 10P ZH-ZH Connector Cord from CX101, then detach the Door Ass’y.
  • Page 8 D-107 3-1. Disengage one each side of 2 TR Springs. Only TR Holder side, don’t disengage Mecha Chassis side. 3-2. Disconnect 2P ZR Connector Cord from CX021, and 4P ZH-ZH Connector Cord from CX042. 3-3. Remove 4 pcs of Special Screw fixing the TR Holder.
  • Page 9 D-107 Short-circuit the Shorting Land on FPC of TR Mecha Sub Ass'y by soldering on the pattern. Pick-up Note: Be sure to short-circuit while FPC is still connected SF-P200R FPC with IF Unit. Also, remove solder on the Shorting Land after connecting it with IF Unit.
  • Page 10 D-107 SUB WOOFER DISASSEMBLY Caution:Be sure to check that there is no jarring sound from sub-woofer or no air-leak through joints of parts after reassembling by playing CD source (ordinary music source) with volume indication level 30. 1. SP Terminal Unit, System Conn. Unit AC Conn.
  • Page 11 D-107 3. Back Cabinet, Front Cabinet 1) Remove 10 screws 2) With holding the Back Cabinet, pull both sides of the Front Cabinet in the arrow direction. Front Cabinet Note: Use a rubber hammer etc. to hit the arrow part of the Front Cabinet if it’s hard to remove.
  • Page 12 D-107 SPEAKER DISASSEMBLY 1. Front Panel 1) Remove 2 screws 2) Lift up bottom end of the Front Panel as shown to release the hook. Note: Unit change will be necessary if farther disassembling is needed.
  • Page 13 D-107 NOTE IN HANDLING FOR LASER PICK-UP Caution for Handling the Laser Pick-up The laser pick-up is assembled and precisely adjusted using a sophisticated manufacturing process in our plant. Do not disassemble or attempt to readjust it. Please observe the following instructions carefully in handling the pick-up.
  • Page 14 D-107 MECHANISM AND FUNCTION OF CD MECHA 1. Traverse Mecha : TR Mecha Sub Ass’y (GEN5327) 2. Door Open/Close Mechanism: Driven by the door open/close motor, Open SW and Close SW are equipped for checking stop position. 3. Disc Transfer Mechanism: Driven by the holder up-down motor, Out SW, Clamp SW, and In SW are equipped for checking stop position.
  • Page 15 D-107 Loader Mecha Timing Chart Timing Chart when close 1 sec. 49 pin DISC_SW Descends holder after 1sec. when ↑ 1. Disc Detect DISC_SW(H) and 12cm_SW (L) 50 pin conditions are satisfied. 12cm_SW ↑ 1. Disc Detect Defines as 8cm disc insertion in case of...
  • Page 16 D-107 Loader Mecha Timing Chart Timing Chart when open ↓ Unload Disc ↓ Open Key Press 49 pin DISC_SW 50 pin 8cm_SW 46 pin CLOSE_SW ↑ 4. Door Open Start IC101 µcom 47 pin OPEN_SW Input ↑ 5. Door Open Stop Port ↑...
  • Page 17 D-107 CONFIRMATION METHOD OF ADJUSTMENT In the µcom of this system, there is a built-in function “adjustment confirmation mode” to check various servo control easily with CD operation buttons. Also, focus offset, tracking offset, tracking balance, focus gain, and tracking gain are all adjusted automatically as the digital servo control is built in the system.
  • Page 18 D-107 Table1 Servo Adjust Value Confirmation List Fdoffset Tdoffset Tbal Fogain Trgain EAh~0Eh EAh~0Eh 6Bh~9Ah 28h~56h 28h~56h EAh~FFh EAh~FFh Value indicated are hexadecimal (HEX) 00h~0Eh 00h~0Eh Fbal value indicated fourth in the item of adjusted value check will be displayed always as 00h because no adjustment is made.
  • Page 19 D-107 3. How to Check HF Level (1) Measuring instruments required a) Oscilloscope b) Test disc: TCD-784 (A-BEX) or Mozart (CO-74176) (2) Attaching connection wire for checking HF level a) Disassemble 1U-3398-1 (Main PWB) → Refer to “DISASSEMBLY” on page 3, 4.
  • Page 20 D-107 BLOCK DIAGRAMS UD-107 BLOCK & WIRING DIAGRAM FG350 1U-3398-7 CONTROL UNIT POWER ON/ TACT SW STANDBY LED CY051 CX051 CX161 CX211 1U-3398-8 MAIN UNIT IC201 IC204 IC203 IC208 IC204 IC207 IC202 DRAM IC203 Reg. +3.3V V V V MOTOR...
  • Page 21 D-107 USW-107 BLOCK & WIRING DIAGRAM UD-107 20P DISM 1U-3417-1 1U-3400-1 POWER AMP UNIT IC201 POWER SUPPLY UNIT 1U-3445-1 Reg. +12V 11P PH-PH AUDIO SIG. 12P PH-PH SYSTEM CONN HPF/LPF UNIT IC202 Reg. +6V TR201 6P PH-PH Reg. -30V 10P EH-EH...
  • Page 22 D-107 LEVEL DIAGRAM D-107 LEVEL DIAGRAM UD107 USW107 LC75396NE TUNER HPF 200Hz INPUT POWER AMP FUNCTION SOURCE L/R SPEAKER SWITCH AUX IN BPF PEAK 70Hz WOOFER AUX OUT WOOFER +30dBV SUB WOOFER +20dBV +10dBV AUX INPUT 2V 0dBV CD 0dB...
  • Page 23 D-107 SEMICONDUCTORS Pin Name Symbol Function IC’s S6/PA6 DISC DOWN Drive V switching at DISC DOWN, Hi: ON Note: Indication before IC No. (SW) denotes “USW-107”. S7/PA7 DSP OSC OFF XTI OFF other than CD FUNCTION S8/PB0 LC78645 LC877296B S9/PB1...
  • Page 24 D-107 Function Symbol MDATA1 DRAM data bus LC78683E (IC203) MDATA2 DRAM data bus MDATA3 DRAM data bus MDATA4 DRAM data bus MDATA5 DRAM data bus MDATA6 DRAM data bus MDATA7 DRAM data bus  DVDD3 DRAM I/F power (3.3V) ...
  • Page 25 D-107 Symbol Function GPDAC Servo D/A general output pin LC78645E (IC204) CONT4 General output pin 4 Control from µcom command, connect to 0V CONT5 General output pin 5 or open when not in use General output pin 6 SBCK/CONT6 or sub-code read out clock input pin Sub-code read out clock input pin / FG sig.
  • Page 26 D-107 M66004FP (IC701) D I G D I G D I G D I G D I G D I G D i s p l a y C o d e R e g i s t e r...
  • Page 27 D-107 LA6559 (IC201) Name Function Thermal 5CH output change terminal, logic input of Shutdown loading block Signal System VCC Signal System GND S-VCC S-GND signal system power supply Input S-Vcc Power Supply (Forward/Reverse/ (LOADING) (BTL-AMP:CH1~4) CH2 to CH4 VCC2 MUTE2...

  • Page 28: Top View

    D-107 LC75396NE (IC305) 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 LSELO LFCOM LINVIN1 LFOUT LRIN LRCOM LROUT LVref TOP VIEW Vref RVref RROUT RINVIN1 RRCOM RSELO RRIN RTIN RFOUT 10 11 12 13 14 15...
  • Page 29 D-107 BA033S (IC207) BA15218F (IC301, 303, 401) BA6417F (IC202) (SW: IC101, 102, 105, 106, 401 ) OUT1 OUT1 − OUT2 OUT2 − +IN1 VRFF 2 4 5 +IN2 1.CTL 2.Vcc 3.GND 4.OUT 5.N. C. MN13821C (IC102) NJM7806FA(S) (IC501) NJM7812FA(S) (SW: IC201)
  • Page 30 D-107 TRANSISTORS DTC114EK DTA114TK 2SC3326 (A/B) DTA114TK DTC323TK DTC114EK DTC323TK PNP Type NPN Type VIEW VIEW 1: Emitter 2: Collector 1: GND/Emitter 3: Base 2: Out/Collector DTA114TK 10kohm 10kohm DTC114EK 10kohm 10kohm 3: In/Base DTC323TK 2.2kohm 2.2kohm DTA124XKA DTA124XKA 2SA1037K...
  • Page 31 D-107 PRINTED WIRING BOARDS 1U-3398 CD-TUNER UNIT ASS'Y HF Level Check Point SIDE - A...
  • Page 32 D-107 1U-3398 CD-TUNER UNIT ASS'Y HF Level Check Point SIDE - B...
  • Page 33 D-107 1U-3400 POWER SUPPLY UNIT ASS'Y COMPONENT SIDE CUATION : C231, 205, 216, 246, 221, 220, 223, 247, 248, 249, RL201, AS201, AS218, and Heat Sink must be fixed with hot-melt or bond.
  • Page 34 D-107 1U-3400 POWER SUPPLY UNIT ASS'Y FOIL SIDE...
  • Page 35 D-107 1U-3401 CD MECHA P .W.B. UNIT ASS'Y Two pieces of 1U-3401-7 LED Unit are arranged on the P .W.B., one for actual use and the other for spare. COMPONENT SIDE FOIL SIDE...
  • Page 36 D-107 1U-3417 POWER AMP UNIT ASS'Y COMPONENT SIDE CUATION : C503~505, C513, C516, C703~705, C713, C716 L500, 501, L700, 701, RL500, and RL700, must be fixed with hot-melt or bond. FOIL SIDE...
  • Page 37 D-107 1U-3445 I/F UNIT ASS'Y COMPONENT SIDE FOIL SIDE...
  • Page 38 D-107 NOTE FOR PARTS LIST Part indicated with the mark " " are not always in stock and possibly to take a long period of time for supplying, or in some case supplying of part may be refused. When ordering of part, clearly indicate "1" and "I" (i) to avoid mis-supplying.
  • Page 39 D-107 PARTS LIST OF P.W.B. UNIT ASS'Y 1U-3398 CD-TUNER UNIT ASS'Y Ref. No. Part No. Part Name Remarks Ref. No. Part No. Part Name Remarks SEMICONDUCTORS GROUP LD702 393 9558 905 LED SML-020MVT IC101 262 3007 006 IC LC877296B-5Z12 IC102...
  • Page 40 D-107 Ref. No. Part No. Part Name Remarks Ref. No. Part No. Part Name Remarks R231 247 2010 956 Carbon chip 20 kohm 1/16W RM73B--203JT R382~384 247 2018 903 Carbon chip 0 ohm 1/16W RM73B--0R0KT R232~235 247 2010 969 Carbon chip 22 kohm 1/16W RM73B--223JT R385 247 2001 907 Carbon chip 2.2 ohm 1/16W...
  • Page 41 D-107 Ref. No. Part No. Part Name Remarks Ref. No. Part No. Part Name Remarks C133 257 0512 903 Ceramic chip 0.1µF/25V CK73F1E104ZT C270 254 4302 974 Electrolytic 100µF/10V CE04W1A101MT(SRE) C134 257 0501 901 Ceramic chip 0.01µF/50V CK73B1H103KT (1608) C271,272 257 0512 903 Ceramic chip 0.1µF/25V...
  • Page 42 D-107 Ref. No. Part No. Part Name Remarks Ref. No. Part No. Part Name Remarks C373,374 254 4193 934 Electrolytic 47µF/16V CE04W1C470MT (SRA) C543 257 0512 903 Ceramic chip 0.1µF/25V CK73F1E104ZT C377,378 257 0506 951 Ceramic chip 100pF/50V CC73CH1H101JT C383 257 0512 903 Ceramic chip 0.1µF/25V...
  • Page 43 D-107 1U-3400 POWER SUPPLY UNIT ASS'Y Ref. No. Part No. Part Name Remarks Q'ty Ref. No. Part No. Part Name Remarks L201 235 0088 932 Chip inductor (4R7MF) SEMICONDUCTORS GROUP IC101,102 263 0615 902 IC BA15218F-DXE2 S801 212 0469 901 Tact switch...
  • Page 44 D-107 Ref. No. Part No. Part Name Remarks Ref. No. Part No. Part Name Remarks R178 247 2009 983 Carbon chip 10 kohm 1/16W RM73B--103JT C191 257 0501 901 Ceramic chip 0.01µF/50V CK73B1H103KT (1608) R179 247 2008 984 Carbon chip 3.9 kohm 1/16W RM73B--392JT C192 257 0511 920 Ceramic chip 0.047µF/50V...
  • Page 45 D-107 1U-3401 CD MECHA P.W.B. UNIT ASS'Y Ref. No. Part No. Part Name Remarks Q'ty Ref. No. Part No. Part Name Remarks OTHERS PARTS GROUP Semiconductors AS201 417 0622 000 Heat sink LD601 393 9600 002 LED SELU5E20C Blue LED...
  • Page 46 D-107 1U-3417 POWER AMP UNIT ASS'Y Ref. No. Part No. Part Name Remarks Ref. No. Part No. Part Name Remarks SEMICONDUCTORS GROUP R536 247 2009 983 Carbon chip 10 kohm 1/16W RM73B--103JT R537 247 2010 927 Carbon chip 15 kohm 1/16W RM73B--153JT...
  • Page 47 D-107 Ref. No. Part No. Part Name Remarks Ref. No. Part No. Part Name Remarks Q'ty C533,534 254 4524 943 Electrolytic 1µF/50V CE04W1H010MT SMG/RE3 OTHERS PARTS GROUP CW039 203 4971 019 3P PH-SAN Connector cord C700 257 0512 903 Ceramic chip 0.1µF/25V...
  • Page 48 D-107 1U-3445 I/F UNIT ASS'Y Ref. No. Part No. Part Name Remarks SEMICONDUCTORS GROUP IC401 263 0615 902 IC BA15218F-DXE2 RESISTORS GROUP R401~408 247 2009 983 Carbon chip 10 kΩ 1/16W RM73B--103JT CAPACITOR GROUP 257 0512 903 Ceramic chip 0.1 µF/25V...
  • Page 49 D-107 EXPLODED VIEW WARNING: Parts marked with this symbol have critical characteristics. Use ONLY replacement parts recommended by the manufacturer.
  • Page 50 GEN 5322 Front panel ass'y 32 144 2781 203 Front panel 33 143 1135 200 Lens (Remote) 34 131 0156 106 DENON badge 35 144 2785 102 Front panel (Speaker) 36 104 0326 206 Stand 37 104 0328 107 Stand (Speaker)
  • Page 51 D-107 EXPLODED VIEW OF CD MECHANISM WARNING: Parts marked with this symbol have critical characteristics. Use ONLY replacement parts recommended by the manufacturer. 50-4 CAUTION: The No.100 screws (marked with , 4pieces) are provided for transportation and production (pully protection).
  • Page 52 D-107 PARTS LIST OF CD MECHANISM UNIT Ref. No. Part No. Part Name Remarks Q'ty Ref. No. Part No. Part Name Remarks Q'ty 1 411 1997 406 Mecha chassis ass'y 50-5 12Disc detect unit 2 412 4863 006 P.W.B. holder (H=6.35)
  • Page 53 D-107 EXPLODED VIEW OF SUB WOOFER WARNING: Parts marked with this symbol have critical characteristics. Use ONLY replacement parts recommended by the manufacturer.
  • Page 54 D-107 PARTS LIST OF SUB WOOFER UNIT Ref. No. Part No. Part Name Remarks Q'ty Ref. No. Part No. Part Name Remarks Q'ty 1U-3400A Power supply unit ass'y SCREWS 1U-3417 Power amp unit Ass'y 101 471 1204 036 Screw 2.6×8 CPS BKNI...
  • Page 55 D-107 PACKING VIEW USW-107 UD-107 215 216 USC-107 204 205 PARTS LIST OF PACKING & ACCESSORIES Ref. No. Part No. Part Name Remarks Q'ty Ref. No. Part No. Part Name Remarks Q'ty 201 501 2163 008 Carton case 221 502 0989 009 USC Cushion-B...
  • Page 56 D-107 FORMING CUSHIONS How to Form USW Cushion Top * Solid lines: Convex shape. Doted lines: Concave shape. 1. USW CUSHION TOP-L 2. USW CUSHION TOP-R How to Form Spacer (Center) Cushion 3. SPACER (CENTER)
  • Page 57 D-107 How to Form USW BTM-L/R Cushion * Solid lines: Concave shape. Doted lines: Convex shape. 4. USW CUSHION BTM-L 5. USW CUSHION BTM-R Hold the cushion in the order as shown (L-side). As for R-side, it is reverse directional from this Fig.
  • Page 58 D-107 How to Form Cushion Top How to Form Cushion BTM * Solid lines: Convex shape. Doted lines: Concave shape. 1. UD CUSHION TOP-B 1. UD CUSHION BTM-B 2. UD CUSHION TOP-A 2. UD CUSHION BTM-A Assemble 2 cushions combining them vertically, top and bottom.
  • Page 59 D-107 WAVE FORMS AC ON CD PLAY CD PAUSE CD PLAY FOCUS ON MP3 PLAY FOCUS ON MP3 PLAY CD STOP → PLAY...
  • Page 60 D-107 SCHEMATIC DIAGRAMS (1/6) 17 18 WARNING: + B LINE Parts marked with this symbol have critical characteristics. Use ONLY replacement parts recommended by the manufacture. - B LINE CAUTION: SIGNAL LINE Before returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassis resistance check.
  • Page 61 D-107 SCHEMATIC DIAGRAMS (1/6) 17 18 WARNING: + B LINE Parts marked with this symbol have critical characteristics. Use ONLY replacement parts recommended by the manufacture. - B LINE CAUTION: SIGNAL LINE Before returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassis resistance check.
  • Page 62 SCHEMATIC DIAGRAMS (1/6)
  • Page 63 D-107...
  • Page 65 17 18 WARNING: + B LINE Parts marked with this symbol have critical characteristics. Use ONLY replacement parts recommended by the manufacture. - B LINE CAUTION: SIGNAL LINE Before returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassis resistance check.
  • Page 66 D-107 SCHEMATIC DIAGRAMS (2/6) + B LINE NOTICE WARNING: - B LINE ALL RESISTANCE VALUES IN OHM. k=1,000 OHM M=1,000,000 OHM Parts marked with this symbol have critical characteristics. ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD Use ONLY replacement parts recommended by the manufacture.
  • Page 67 D-107 SCHEMATIC DIAGRAMS (2/6) + B LINE NOTICE WARNING: - B LINE ALL RESISTANCE VALUES IN OHM. k=1,000 OHM M=1,000,000 OHM Parts marked with this symbol have critical characteristics. ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD Use ONLY replacement parts recommended by the manufacture.
  • Page 68 SCHEMATIC DIAGRAMS (2/6)
  • Page 69 D-107...
  • Page 70 NOTICE ALL RESISTANCE VALUES IN OHM. k= ALL CAPACITANCE VALUES IN MICRO EACH VOLTAGE AND CURRENT ARE CONDITION. CIRCUIT AND PARTS ARE SUBJECT T NOTICE.
  • Page 71 + B LINE WARNING: - B LINE OHM. k=1,000 OHM M=1,000,000 OHM Parts marked with this symbol have critical characteristics. N MICRO FARAD. P=MICRO-MICRO FARAD Use ONLY replacement parts recommended by the manufacture. SIGNAL LINE NT ARE MEASUERD AT MO SIGNAL INPUT CAUTION: Before returning the unit to the customer, make sure you make either (1) a BJECT TO CHANGE WITHOUT PRIOR...
  • Page 72 D-107 SCHEMATIC DIAGRAMS (3/6) + B LINE - B LINE SIGNAL LINE NOTICE WARNING: ALL RESISTANCE VALUES IN OHM. k=1,000 OHM M=1,000,000 OHM Parts marked with this symbol have critical characteristics. ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD Use ONLY replacement parts recommended by the manufacture.
  • Page 73 D-107 SCHEMATIC DIAGRAMS (3/6) + B LINE - B LINE SIGNAL LINE NOTICE WARNING: ALL RESISTANCE VALUES IN OHM. k=1,000 OHM M=1,000,000 OHM Parts marked with this symbol have critical characteristics. ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD Use ONLY replacement parts recommended by the manufacture.
  • Page 74 SCHEMATIC DIAGRAMS (3/6)
  • Page 75 D-107...
  • Page 76 NOTICE ALL RESISTANCE VALUES IN OHM ALL CAPACITANCE VALUES IN MIC EACH VOLTAGE AND CURRENT A CONDITION. CIRCUIT AND PARTS ARE SUBJEC NOTICE.
  • Page 77 + B LINE - B LINE SIGNAL LINE WARNING: S IN OHM. k=1,000 OHM M=1,000,000 OHM Parts marked with this symbol have critical characteristics. ES IN MICRO FARAD. P=MICRO-MICRO FARAD Use ONLY replacement parts recommended by the manufacture. RRENT ARE MEASUERD AT MO SIGNAL INPUT CAUTION: Before returning the unit to the customer, make sure you make either (1) a E SUBJECT TO CHANGE WITHOUT PRIOR...
  • Page 78 D-107 SCHEMATIC DIAGRAMS (4/6) NOTICE ALL RESISTANCE VALUES IN OHM. k=1,000 OHM M=1,000,000 OHM ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD EACH VOLTAGE AND CURRENT ARE MEASUERD AT MO SIGNAL INPUT CONDITION. CIRCUIT AND PARTS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
  • Page 79 D-107 SCHEMATIC DIAGRAMS (4/6) NOTICE ALL RESISTANCE VALUES IN OHM. k=1,000 OHM M=1,000,000 OHM ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD EACH VOLTAGE AND CURRENT ARE MEASUERD AT MO SIGNAL INPUT CONDITION. CIRCUIT AND PARTS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
  • Page 80 SCHEMATIC DIAGRAMS (4/6)
  • Page 81 D-107...
  • Page 83 NOTICE ALL RESISTANCE VALUES IN OHM. k=1,000 OHM M=1,000,000 OHM ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD EACH VOLTAGE AND CURRENT ARE MEASUERD AT MO SIGNAL INPUT CONDITION. CIRCUIT AND PARTS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. WARNING: Parts marked with this symbol have critical characteristics.
  • Page 84 D-107 SCHEMATIC DIAGRAMS (5/6) NOTICE ALL RESISTANCE VALUES IN OHM. k=1,000 OHM M=1,000,000 OHM ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD EACH VOLTAGE AND CURRENT ARE MEASUERD AT MO SIGNAL INPUT CONDITION. CIRCUIT AND PARTS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
  • Page 85 D-107 SCHEMATIC DIAGRAMS (5/6) NOTICE ALL RESISTANCE VALUES IN OHM. k=1,000 OHM M=1,000,000 OHM ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD EACH VOLTAGE AND CURRENT ARE MEASUERD AT MO SIGNAL INPUT CONDITION. CIRCUIT AND PARTS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
  • Page 86 SCHEMATIC DIAGRAMS (5/6)
  • Page 87 D-107...
  • Page 89 NOTICE ALL RESISTANCE VALUES IN OHM. k=1,000 OHM M=1,000,000 OHM ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD EACH VOLTAGE AND CURRENT ARE MEASUERD AT MO SIGNAL INPUT CONDITION. CIRCUIT AND PARTS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. WARNING: Parts marked with this symbol have critical characteristics.
  • Page 90 D-107 SCHEMATIC DIAGRAMS (6/6) + B LINE - B LINE NOTICE ALL RESISTANCE VALUES IN OHM. k=1,000 OHM M=1,000,000 OHM ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD EACH VOLTAGE AND CURRENT ARE MEASUERD AT MO SIGNAL INPUT CONDITION. CIRCUIT AND PARTS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
  • Page 91 D-107 SCHEMATIC DIAGRAMS (6/6) + B LINE - B LINE NOTICE ALL RESISTANCE VALUES IN OHM. k=1,000 OHM M=1,000,000 OHM ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD EACH VOLTAGE AND CURRENT ARE MEASUERD AT MO SIGNAL INPUT CONDITION. CIRCUIT AND PARTS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
  • Page 92 SCHEMATIC DIAGRAMS (6/6)
  • Page 93 D-107...
  • Page 95 + B LINE - B LINE NOTICE ALL RESISTANCE VALUES IN OHM. k=1,000 OHM M=1,000,000 OHM ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD EACH VOLTAGE AND CURRENT ARE MEASUERD AT MO SIGNAL INPUT CONDITION. CIRCUIT AND PARTS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.