Menu Function - Denon D-107 Operating Instructions Manual

7

MENU FUNCTION

Be sure to set the current time beforehand.
2
Various functions can be operated and various settings made using the menu function.
2
Press the + or button after pressing the MENU button to perform the settings listed below.
Setting item
Set the display's brightness.
[Display brightness
Select "Normal", "Dimmer-1" or "Dimmer-2".
setting]
[Timer time setting]
[Timer mode setting] [Timer ON/OFF setting]
[Timer setting check]
Use this to set the current time.
[Time setting]
[Presettings]
[Tuner mode setting]
[Station name setting]
Use this for a lower power consumption in the standby mode.
Set to "On" or "Off".
[Eco-mode setting]
This function can be used to automatically set the power to the
standby mode if the set remains in the stop mode for the set amount
of time with the function set to "CD".
[Auto off mode setting]
Set to "On" or "Off" and select the time (5, 10, 20 or 30 minutes).
The MENU button functions in both the
2
MENU
stop and play modes.
(RC-909)
Press the MENU button to cancel the
2
MENU
menu function currently being set.
(RC-909)
Setting details Page
Use this to make the everyday timer
17, 18
and once timer settings.
Use this to turn the everyday timer and
once timer to "ON" or "OFF".
Use this to check the everyday timer and
once timer settings.
Use this to store the reception band
and frequency at the number buttons.
Use these to give names to
automatically set stations.
To set the menu functions back to the default
2
values, press the FUNCTION and / buttons on
1 3
the main unit simultaneously, then within 3
seconds press the /BAND button.
2
"RAM CLEAR" is displayed for approximately 2
seconds and the values are reset to their defaults.
FUNCTION / BAND
2
Within
3 seconds
(Main unit) (Main unit) (Main unit)
Display brightness setting
TIME TITLE FOLDER SLEEP
TONE/SDB DISPLAY ENTER MENU
STOP PLAY/PAUSE
/BAND
VOLUME
PRESET
13
+
3
-
MUTE FUNCTION
1 Press the MENU button.
18
MENU
19
2 Press the ENTER button.
14
MENU
15
3 Press the +/ buttons to
select the display
16
brightness.
Each time you press this
buttons, the display
13
changes as follows:
Normal? Dimmer-1?
14
4 Press the ENTER button.
• The setting is entered.
Eco-mode setting
Be sure to set the current time beforehand.
2
1
TIME TITLE
2, 4
TONE/SDB DISPLAY
STOP PLAY/PAUSE
/BAND
PRESET
+
2, 4
-
MENU
1 Press the MENU button.
MENU
ENTER
2 Press the +/ buttons to
select "ECO Mode".
PRESET
MENU
+
-
3 Press the ENTER button.
Dimmer-2?
MENU
ENTER
4 Press the +/ buttons to
make "On" or "Off"
flash.
The selected setting ("On"
or "Off") switches each time
the +/ buttons is pressed.
The setting that is flashing is
the one that is selected.
5 Press the ENTER button.
• The "MENU" indicator turns off
and the setting is completed.
NOTE:
The display and indicators remain off while the
standby mode is set in the eco-mode.
To turn on the power, press the ON/STANDBY
button on the CD receiver or the POWER button
on the remote control unit. (The auto power on
function does not work.)
ENGLISH
FOLDER SLEEP
ENTER MENU
1
3, 5
VOLUME
MUTE FUNCTION
MENU
PRESET
+
-
ENTER
PRESET
+
-
ENTER
13