Listening To The Radio - Denon D-107 Operating Instructions Manual

9

LISTENING TO THE RADIO

(1) Station Selection
[Example] Set the reception frequency to "FM 87.50 MHz".
PERSONAL AUDIO SYSTEM / CD RECEIVER
ON / STANDBY VOLUME
FUNCTION / BAND
2
1 2 3 5
OPEN / CLOSE POWER
1
5
PROG /
DIRECT
1 2 3
CALL
4 5 6
CLEAR
7 8 9
RANDOM REPEAT
10 +10
TIME TITLE FOLDER SLEEP
TONE/SDB DISPLAY ENTER MENU
STOP PLAY/PAUSE
/BAND
VOLUME
3
PRESET
+
5
-
MUTE FUNCTION
4 2
TUNING
1 Press the button
ON / STANDBY
POWER
to turn the power
on.
Lit green
(Main unit) (RC-909)
2 Press the
FUNCTION
FUNCTION
FUNCTION button
and set the
function to
"TUNER".
(Main unit) (RC-909)
3
Press the /BAND
2
/ BAND STOP
2
/BAND
button to select
"FM".
(Main unit) (RC-909)
4 Press the TUNING
buttons and set the
receive frequency to TUNING
"FM 87.50 MHz".
(RC-909)
• When a station is tuned in,
the " " indicator lights.
Auto tuning
2
Hold the tuning button down for more than
0.5 second and release to automatically
receive broadcast stations with strong
signals.
Tuning will not stop automatically if the
antenna's input level is low (if the " "
indicator does not light).
• To stop auto tuning, press the TUNING
buttons once (for under 0.5 seconds).
2 Manual tuning
The reception frequency changes each
time one of the buttons is pressed (for less
than 0.5 seconds).
5 Press the VOLUME buttons to adjust
the volume.
VOLUME
VOLUME
(Main unit) (RC-909)
Receiving FM programs in stereo
• When the reception mode is set to "FM AUTO"
and a stereo broadcast is tuned in, the "ST"
indicator lights and the broadcast is received in
stereo.
• If the antenna input level is low and stereo
reception is unstable, set the reception mode to
"FM MONO" to receive in mono and achieve a
better sound. The last set reception mode is
stored in the memory.
NOTE:
A humming sound may be heard when using a TV
nearby while receiving AM programs. If this
happens, move the system as far from the TV as
possible.
(2) Storing Broadcast Stations
Be sure to set the current time beforehand.
2
Up to 30 FM and AM stations can be preset.
2
[Example] Store the tuned "FM 87.50 MHz" to
preset number "3".
OPEN / CLOSE POWER
5
PROG /
DIRECT
1 2 3
CALL
4 5 6
7
CLEAR
7 8 9
RANDOM REPEAT
10 +10
TIME TITLE FOLDER SLEEP
TONE/SDB DISPLAY ENTER MENU
1, 10
3, 4, 6, 8
STOP PLAY/PAUSE
/BAND
VOLUME
5
PRESET
+
2, 7
-
MUTE FUNCTION
5
TUNING
1 Press the MENU button.
MENU
MENU
2 Press the +/ buttons to
PRESET
select "Tuner Mode".
+
-
MENU
3 Press the ENTER button.
ENTER
MENU
4
Press the ENTER button.
ENTER
MENU P.SET
MEMO
ENGLISH
5 Press the /BAND button and
2
TUNING buttons, receive the
broadcast station "FM 87.50 MHz"
that you want to store to preset
memory.
STOP
/BAND
and
TUNING
6 Press the ENTER button.
ENTER
Last preset number
MENU P.SET
MEMO
7 Press the +/ buttons or number
buttons to display the number that
you want to store.
PRESET
+
3
or
-
8
Press the ENTER button.
ENTER
9 Repeat step 3 to 7 to set other
station, or change a preset station.
10 Press the MENU button to
MENU
complete the setting.
• The "MENU" indicator turns off.
To cancel the operation in the middle, press the
MENU button before performing step 7.
NOTES:
• If a station is preset at a number where a
station is already preset, the previous station is
replaced with the new station.
• The preset memory is not cleared immediately
when the power supply cord is unplugged, but
is cleared if the cord left unplugged for an
extended period of time. If this happens, preset
the stations again.
15