McAfee OFFICE 3.1 User Manual page 64

McAfee Utilities
2. Do one of the following and click the Next > button:
3. Select the hard drives you want to restore and click Next >.
4. Select the kinds of information you want to restore.
64 McAfee Office
Figure 4-5. McAfee Image Recover
• Select an image file to use for restoring your drives from the list of
those found on your system hard drive.
• Click the Scan >> button to look for additional image files if you
don't see the one you want to use. Image scans your hard drives for
image files. Select one of them and click Next >.
Image defaults to restoring the master boot sector, partitions and the File
Allocation Tables. In most cases, you should use the Image default
settings. If you are an advanced user, you may want to only restore one
or two of the options:
• Master boot sector–Select this option if you cannot start the PC from
your system hard drive. The master boot sector is the sector on your
system hard disk that contains boot information with instructions
for starting up your PC.
• Partitions–Select this option if you cannot find a logical drive on
your PC. Partitions subdivide a physical drive into multiple logical
drives. Each partition has its own drive letter.
Select an image file from
the list and click Next >
to begin restoring your
hard disks
Click Scan >> to locate
image files stored on
any disk drive on your PC;
you can restore image
files from any drive, even
damaged hard drives