McAfee OFFICE 3.1 User Manual page 46

McAfee VirusScan
2. For each module that you want to enable, click the corresponding icon
3. Select the Enable checkbox at the top of each page.
Understanding the VShield system tray icon states
The VShield scanner displays four different icon states in the Windows system
tray to indicate which, if any, of its modules are active. An active module is one
that the VShield scanner has enabled, or loaded into memory, and that is ready
to scan inbound and outbound files. An inactive module is one that the
VShield scanner has disabled. Such modules do not scan files.
The following table shows and describes each icon state:
46 McAfee Office
Figure 3-8. VShield Properties dialog box
along the left side of the dialog box, then click the Detection tab.
This icon means that the VShield scanner has started and all VShield
modules are active
This icon means that the System Scan module is active, but one or more
of the other VShield modules is inactive
This icon means that the System Scan module is inactive, but one or
more of the other VShield modules is active
This icon means that all VShield modules are inactive