McAfee OFFICE 3.1 User Manual page 44

McAfee VirusScan
4. Select the Load VShield on startup checkbox at the top of the
5. Click OK to close the control panel.
Enabling the VShield scanner and its modules
Once you have all VShield components installed, you can use any of four
methods to enable them, in various combinations. Three methods appear here.
Method 1: Use the VShield shortcut menu
Follow these steps:
1. Right-click the VShield icon
2. Point to Quick Enable.
3. Choose one of the module names shown without a check mark. Module
44 McAfee Office
Figure 3-6. VirusScan control panel - Components page
Components property page.
NOTE: Enabling a module means activating it and loading it into your
computer's memory for use. The VShield scanner can start and remain
active in memory even with none of its modules enabled.
shortcut menu.
names that have a check mark beside them are active. Those without a
check mark are inactive. If you use this method to enable a module, it
remains enabled until you restart your VirusScan software or your
computer. At that point, its state will depend on whether you have
enabled or disabled the module in the VirusScan Properties dialog box.
in the Windows system tray to display its