McAfee OFFICE 3.1 User Manual page 45

Depending on which combination of modules you enable, the VShield icon
will display a different state.
Method 2: Use the System Scan Status dialog box
Follow these steps:
1. Double-click the VShield icon
System Scan Status dialog box.
Figure 3-7. System Scan Status dialog box
2. For each module that you want to enable, click the corresponding tab,
then click Enable. The same button in the property page for active
modules will read Disable.
3. Click Close to close the dialog box.
Method 3: Use the VShield Properties dialog box
Follow these steps:
1. Right-click the VShield icon
VShield shortcut menu, point to Properties, then choose System Scan
to open the VShield Properties dialog box.
in the Windows system tray to open the
in the Windows system tray to display the
McAfee VirusScan
User's Guide 45