Connecting The Printer Cables; Ethernet Cable Connection - Ricoh Aficio SP W2470 Hardware Manual

3. Connecting the Printer

Ethernet Cable Connection

Prepare a hub and other network devices, and connect the Ethernet cable to the
printer.
Connect 10BASE-T or 100BASE-TX cable to the printer's Ethernet port. For
1000BASE-T, the optional Gigabit Ethernet board is available.
Important
❒ An Ethernet cable is not supplied with this printer. Select your cable accord-
ing to the network environment.
❒ The printer's Ethernet and USB ports are not available when the Gigabit
Ethernet board is attached to the printer.
Connecting to the standard Ethernet port
A
Attach the ferrite core to the Ethernet cable.
Attach the core supplied with the printer to the connector end, making a loop
as shown.
B
Connect the Ethernet cable to the Ethernet port that is located on the rear
side of the printer.
C
Connect the other end of the cable to the network, for example using a hub.
BAL070S
BAL057S
Cables
33