Connecting The Printer To A Pc - Ricoh Aficio SP C210 Setup Manual

9. Connecting the Printer to a PC

Before connecting the printer to the PC, check to make sure that the power
to the printer main unit is switched off.
Connect the printer to the PC.
9.1 Setting the USB
(a) Connect a USB cable to the USB interface connecter on the rear panel of the printer.
(b) Connect a USB cable to the PC.
Next, install the printer driver. The driver installation procedure varies depending on your
PC's OS.
•
Windows 98/Me: See page 2-24
•
Windows 2000/XP/Server 2003: See page 2-26
•
Mac OS 9: See Mac OS 9 Supplement
•
Mac OS X: See Mac OS X Supplement
Before connecting the printer to a PC
USB cable
2-21
USB interface connector
This connector is used for USB cable
connection of the printer.