Installing Device Certificate - Ricoh Aficio SP W2470 Hardware Manual

Configuration

Installing Device Certificate

A
Start your Web browser.
B
Log on to Web Image Monitor in the administrator mode.
C
Click [Configuration].
D
Click [Device Certificate] in "Security".
E
Click [Certificate 2] on "Device Certificate" window, and then click [Request].
F
Enter appropriate "Common Name" and "Country Code" on "Certificate
Information" page, and then click [OK].
4
G
"Updating..." appears. Wait for about two minutes, and then click [OK].
H
Click [Details], shown in the "Device Certificate" window as the memo pad
icon for "Requesting".
I
Select all, and then copy the entire "Text for Requested Certificate" text
that is displayed in the "Certificate Status" window.
J
Access the certificate authority server, and then obtain the CA signified cer-
tificate using the text copied into "Text for Requested Certificate" windows.
Obtaining the certificate differs depending on the environment you want to
use.
K
Click [Certificate 2] on "Device Certificate" window, and then click [Install].
L
Using a text editor, open the CA signified certificate downloaded in step 10,
and then copy over all the text.
M
In the [Install Certificate] window, paste all the text copied into CA signified
certificate.
N
Click [OK].
O
"Updating..." appears. Wait for about one or two minutes, and then click
[OK].
P
Check that the "Device Certificate" shows "Installed".
Q
Click [Certificate 2] on "Certification", and then click [OK].
R
Click [Logout].
S
Quit Web Image Monitor.
62