Loading Cut Paper Into Tray 3 - Ricoh Aficio SP W2470 Hardware Manual

Loading Cut Paper into Tray 3

The following procedure explains loading cut paper.
A
Pull the cut paper tray partially out while lifting it upward.
B
Holding both sides, lift the front end of the tray, and then pull the tray com-
pletely out.
C
While pressing the release lever, open the side fence ( ).
To change the paper size, adjust the end fence to the paper size while pressing
the release lever ( ).
BAL027S
BAL028S
BAL029S
Loading Paper
5
81