Configuration
LEAP:
• Click [Change] in "Password", and then enter the password set in the RA-
DIUS server.
EAP-TTLS:
• Click [Change] in "Password", and then enter the password set in the RA-
DIUS server.
• Click [Change] in "Phase 2 User Name", and then enter the user name set
in the RADIUS server.
• Select [CHAP], [MSCHAP], [MSCHAPv2], [PAP], or [MD5] in "Phase 2 User
Name".
• Certain methods might not be available, depending on the RADIUS server
you want to use.
4
Make the following settings according to the operating system you are using:
• Select [On] or [Off] in "Authenticate Server Certificate".
• Select [On] or [Off] in "Trust Intermediate Certificate Authority".
• Enter the host name of the RADIUS server in "Server ID".
PEAP:
• Click [Change] in "Password", and then enter the password set in the RA-
DIUS server.
• Click [Change] on "Phase 2 User Name", and then enter the user name set
in the RADIUS server.
• Select [MSCHAPv2] or [TLS] in "Phase 2 Method".
• When you select [TLS], Select the client certificate you want to use in "WPA
Client Certificate".
Make the following settings according to the operating system you are using:
• Select [On] or [Off] in "Authenticate Server Certificate".
• Select [On] or [Off] in "Trust Intermediate Certificate Authority".
• Enter the host name of the RADIUS server on "Server ID".
L
Click [OK].
M
Click [Logout].
N
Quit Web Image Monitor.
Note
❒ If there is a problem with settings, you might not be able to communicate
with the printer. To identify the problem, open the Web Image Monitor
system log or print a network summary.
❒ If you cannot identify the problem, reset the printer interface to normal,
and then repeat the procedure from the beginning.
64