Configuring Network Settings When Using Netware - Ricoh Aficio SP W2470 Hardware Manual

Configuring Network Settings When Using NetWare

If you use NetWare, select the appropriate NetWare frame type.
Select one of the items below as necessary.
• Auto Select
• Ethernet II
• Ethernet 802.2
• Ethernet 802.3
• Ethernet SNAP
Important
❒ Usually, you can use the default (Auto Select). When you first select [Auto Se-
lect], the frame type detected by the printer is adopted. However, if your net-
work can use more than two frame types, the printer may fail to select the
correct frame type with [Auto Select] selected. In this case, select the preferred
frame type.
A
Press the {Menu} key.
B
Press the {U} or {T} key to select [Host Interface], and then press the {OK} key.
C
Press the {U} or {T} key to select [Network], and then press the {OK} key.
BAL051S
Ethernet Configuration
45
4