Connecting A Dvd Player And Monitor Tv - Denon AVR-1906 Operating Instructions Manual

ENGLISH
Easy Setup and Operation

Connecting a DVD player and monitor TV

• To connect the video output from the DVD player to the AVR-1906, you only need to choose one
connection type. Component video connection offers the best quality (and is required for
progressive DVD playback), followed by S-Video, while composite video offers the lowest picture
quality of the three connection types. For more information about the video conversion function
( page 12).
• To connect the digital audio output from the DVD player, you can choose from either the coaxial
or optical connections. If you choose to use the coaxial connection, it needs to be assigned. For
more information about Digital Input Assignment (
• Connect a non-DVD video disc player (such as a laser disc, VCD/SVCD, or future high definition
disc player) to the DVD/VDP terminals in the same way.
Audio signal flow is shown with white arrows; video signal flow is shown with gray arrows.
page 36).
DVD player
COMPONENT VIDEO OUT
H
Y
P
B
P
R
G
S VIDEO
OUT
F
VIDEO
OUT
D
OPTICAL
OUT
A AUDIO OUT
L
L L
R R R
ENGLISH
• For best picture quality (especially with progressive DVD and other high definition sources),
choose the component video connection to your monitor TV. S-Video and composite video
outputs are also provided if your TV does not have component video inputs.
NOTE:
• The component video input and/or output terminals may be labeled differently on some TVs,
monitors or video components (Y, P
for the other components for further information.
7
Easy Setup and Operation
Monitor TV
COMPONENT VIDEO IN
H
G
F
, P ; Y, C , C ; Y, B-Y, R-Y). Check the owner's manuals
B R B R
Y
P
B
P
R
S VIDEO
IN
VIDEO
IN