Settings; Menu Map; Input Setup - Denon AVR-1910 Owner's Manual

Settings

With the AVR-1910, settings and operations for most functions can be performed by operating while looking at the menus displayed on the monitor screen.

Menu map

1
n Operations
Setting menus
n
MENU
1.Parameter
2.Information
3.Auto Setup
4.Manual Setup

5.Input Setup

[ENT]:Select
Items that only need to be set once
Set these for example upon purchase.
Once these items are set, there is no need to
set them again unless the speaker layout or the
connected speakers have been changed.
Front
2
ui
P ress to
P ress .
select the item
The menu is
you want to
displayed.
set, then press
.
Setting items
1. Parameter
Adjust various audio parameters.
2. Information
Show information about receiver
settings, input signals, etc.
3. Auto Setup
Makes the optimum speaker
settings and corrects for the
acoustic characteristics of the
room.
4. Manual Setup
Use this to make various types of
detailed settings.
5. Input Setup
Use this to make settings related
to playing input sources.
3 4
ui uiop
P ress to U se
select the item then press
you want to
b To return to the previous item, press
set, then press
b Select "Default Yes", then press
reset to the default setting.
.
Number Detailed items
1-1 Surround Parameter Adjust surround sound parameters.
1-2 Tone Control Adjusts the treble and bass tone.
Makes the MultEQ, Dynamic EQ and Dynamic Volume settings.
1-3 Audyssey Settings
Adjust tonal quality for each speaker using graphic equalizer.
1-4 Manual EQ
1-5 RESTORER Uncompress compressed sources and apply bass boost for richer sound.
1-6 Audio Delay Compensate for incorrect timing between video and audio.
2-1 Status Shows information about current settings.
2-2 Audio Input Signal Shows information about audio input signals.
2-3 HDMI Information Displays the HDMI input/output signals and TV information.
Displays the settings stored for the auto surround mode.
2-4 Auto Surround Mode
Displays the settings stored for the Quick Select function.
2-5 Quick Select
2-6 Preset Channel Shows information about preset channels.
3-1 Audyssey Auto Setup Makes the optimum settings for the speakers being used
automatically.
Check Audyssey Auto Setup measurement results.
3-2 Parameter Check
This item is only displayed after the Audyssey Auto Setup procedure
has been performed.
4-1 Speaker Setup Sets the speaker size and distance, the channel level, etc.
4-2 HDMI Setup Make settings for HDMI video/audio output.
4-3 Audio Setup Make settings for audio playback.
4-4 ZONE2 Setup Make settings for audio playback in a ZONE2 system.
4-5 Option Setup Make various other settings.
5-1 Assign Change input connector assignment.
5-2 Video Makes the video settings.
Sets the audio input mode and decode mode.
5-3 Input Mode
Change the display name for this source.
5-4 Rename
5-5 Source Level Adjust the playback level of the audio input.
5-6 iPod Playback Mode Make settings for iPod playback.
5-1 Auto Preset Use the auto preset function to program radio stations.
5-2 Preset Skip Set the preset memories that you do not want to display when tuning.
5-3 Preset Name Assign name to a preset memory.
5-2 Parental Lock Set the channel radio reception limits.
5-3 Antenna Aiming Check the SIRIUS radio reception sensitivity.
to select the item,
5
P ress
to set.
.
The settings made up to that
to
point are entered and the
settings menu screen turns off.
Description
ENGLISH
.
Page
44
46
46
47
48
48
48
48
48
48
48
48
21
24
25
28
29
30
30
33
34
34
35
35
35
36
36
36
37
37
8