Settings - Denon AVR-X3200W Owner's Manual

Contents
o MultEQ XT
®
MultEQ XT compensates for both time and frequency characteristics
®
of the listening area based on Audyssey
Selection is done from three types of compensation curves. We
recommend the "Reference" setting.
Reference
(Default):
L/R Bypass:
Flat:
Off :
0 When using headphones, "MultEQ
Front panel
Downloaded from www.Manualslib.com
Connections Playback
® Setup measurement results.
Selects the default calibrated setting with
a slight roll off at high frequencies, which
is optimized for movies.
Selects the reference setting, but
bypasses MultEQ XT on the front left
®
and right speakers.
Selects the calibrated setting which is
optimized for small rooms where your
listening position is closer to the
speakers.
Do not use "MultEQ ® XT".
® XT" is automatically set to "Off".
Display Rear panel
manuals search engine

Settings

o Dynamic EQ
Solves the problem of deteriorating sound quality as volume is
decreased by taking into account human perception and room
acoustics.
Works with MultEQ ® XT.
On
(Default):
Off:
0 When the menu "Dynamic EQ" setting is "On", it is not possible to do "Tone"
adjustment. (v p. 119)
163
Remote
Tips Appendix
Use Dynamic EQ.
Do not use Dynamic EQ.
Index