Listening To Fm/Am Broadcasts - Denon AVR-1910 Owner's Manual

Denon av surround receiver user manual
Hide thumbs Also See for AVR-1910:
Table of Contents

Advertisement

ENGLISH
4
Press
and hold it down for a 2 seconds or more to
select the display mode.
There are two modes for display the contents recorded on the
iPod.
Browse mode :Displayed on the TV screen.
Remote mode :Displayed on the iPod's screen.
Display mode
Browse mode
Audio file
Playable
files
Video file
Remote control
Active
unit (AVR-1910)
buttons
iPod ®
z1: When using an ASD-11R, ASD-3N or ASD-3W control dock for
iPod.
z2: Video may not be output, depending on the combination of
ASD-1R or ASD-11R and iPod.
5
ui
Use
to select the menu, then
p
press
or
to select the music or
video file to be played.
6
p
Press
or
.
Playback starts.
7
Use
to adjust the volume.
H – – –
–80.0dB ~ 18.0dB
G
Variable range
The variable range differs according to the input signal and channel
level setting.
8
Select the desired surround mode.
(vpage 42 "Selecting the Surround Mode")
9
Adjust the desired sound field effects.
(vpage 44 "Adjusting the sound Field Effects")

n
To stop
During playback, either press and hold
n
Stopping playback temporarily
During playback, press
Press again to resume playback.
n
To cue to the beginning of a track
During playback,
Remote mode
the current track) or
track).
S
S
n
Repeat playback and shuffle
S z
S z
1
2
playback
S
S
"iPod Playback Mode" (vpage 35)
A
S
Use the RESTORER mode to expand the low and high frequency
components of compressed audio files and achieve a richer sound.
Front
The default setting is "Mode3" (vpage 48).
To check the name of the title, the artist or the
album when playing in browse mode, press
.
The time (default : 30 sec) for which the on-
screen display are displayed can be set at
menu "iPod Information" (vpage 31). Press
uio
p
to return to the original screen.
Press
and set the AVR-1910's power to the
standby mode before disconnecting the iPod.
Also switch the input source to one to which
the menu "iPod dock" is not assigned before
disconnecting the iPod.
NOTE
Depending on the type of iPod and the software version, some
functions may not operate.
DENON will accept no responsibility whatsoever for any loss of iPod
data.
or press
.
Front
or
.
either press (to cue to
(to cue to the next
Front
Front
Viewing Still Pictures or Videos on the iPod ®
Photo and video data on the iPod can be viewed on the monitor. Only
for iPod equipped with slideshow or video functions. (When using an
ASD-1R or ASD-11R)
Video may not be output, depending on the combination of ASD-1R
or ASD-11R and iPod.
1
Press and hold
to set the Remote
mode.
"Remote iPod" is displayed on the AVR-
1910's display.
2
ui
Watching the iPod's screen, use
to select "Photos" or "Videos".
3
Press
until the image you want to
view is displayed.
"TV Out" at the iPod's "Slideshow Settings" or "Video Settings" must
be set to "On" in order to display the iPod's photo data or videos on
the monitor. For details, see the iPod's operating instructions.
iPod is a trademark of Apple Inc., registered in the U.S. and other
countries. The iPod may only be used to copy or play contents that
are not copyrighted or contents for which copying or playback is
legally permitted for your private use as an individual. Be sure to
comply with applicable copyright legislation.

Listening to FM/AM Broadcasts

Basic Operation
1
Set
to "MAIN/TV" and
to "MAIN".
2
Press
to select "TUNER".
Playing Components
Front
Front
Front

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1910 - avr av receiver

Table of Contents