Stereo Playback; Playing The Pure Direct Mode; Adjusting The Sound Field Effects (Parameter); Adjusting The Sound Field Effects (Surround Parameter) - Denon AVR-1910 Owner's Manual

Selecting the Surround Mode
r Stereo Playback
This is the mode for playing in stereo. The tone can be adjusted.
Sound is output from the front left and right speakers and
subwoofer.
1
Select the input source by pressing
and play the source (vpage
38).
2
Press to select the "STEREO".
t Playing the Pure Direct mode
This is the mode that recreates the original sound most faithfully,
providing extremely high quality sound.
1
Select the input source by pressing
and play the source (vpage
38).
2
Press .
• To cancel, press again.
• The channel level and surround parameters in the PURE DIRECT
mode are the same as in the DIRECT mode.
NOTE
When in the PURE DIRECT mode, the on-screen display is not
displayed and the display on the main unit is turned off.
Remote control
operation buttons
Front
Rear
Front
Rear
Displaying the menu
:
: Moves the cursor (Up/Down/Left/Right)
Cancel the menu

Adjusting the Sound Field Effects (Parameter)

The sound being played in the surround mode can be adjusted to your liking.
The items (parameters) that can be adjusted depend on the signal being input and the currently set surround
mode. For details on the adjustable parameters, see "Surround Modes and Parameters" (vpage 58).
NOTE
Some of the setting items cannot be set while playback is stopped. Set these items during playback.
Adjusting the sound fi eld effects (Surround Parameter)
Setting items
Mode
n In the PLgx, PLg or PLgz mode
Set the play mode for
Cinema : This is the mode for cinema source.
playing 2-channel sources in Music : This is the mode for music source.
Game : This is the mode for game source.
surround.
ProLogic : Dolby Pro Logic playback mode (PLg mode only). (This is
the mode for 4-channel playback (front L, front R, center, surround
(MONO).)
n In the DTS NEO:6 mode
Cinema : This is the mode for cinema source.
Music : This is the mode for music source.
• The "Music" mode is also effective for movie sources including a
lot of stereo music.
• The "Cinema" and "Music" modes can also be set by pressing
or
Cinema EQ
OFF : "Cinema EQ" is not used.
ON : "Cinema EQ" is used.
Soften the treble range of
movie sound tracks for better
understanding.
Dynamic Range
Low/Mid/High : These set the compression level.
Compression (D.Comp) OFF : Turn dynamic range compression off.
Compress dynamic range
T he "D.Comp" indicator lights when playing DTS source that supports
(difference between loud
the "D.Comp" function.
and soft sounds).
Dynamic Range Control Auto : Dynamic range compression of Dolby TrueHD sources turns on and
(DRC) off automatically.
Low/Mid/High : These set the compression level.
Compress dynamic range
OFF : Turn dynamic range compression off.
LFE –10dB ~ 0dB
Adjust the low-frequency
For proper playback of the different program sources, we recommend
effects level (LFE).
setting to the values below.
• Dolby Digital sources :
• DTS movie sources :
• DTS music sources :
: Decision the setting
Default settings are underlined.
Setting contents
.
"0dB"
"0dB"
"–10dB"
: Return to previous menu
ENGLISH