Restoring Compressed Audio To Nearly Pre-Compressed Conditions For Playback (Restorer); Adjusting The Audio Delay Time While Watching The Picture; Delay); Checking The Status (Information) - Denon AVR-1910 Owner's Manual

Restoring compressed audio to nearly pre-compressed
conditions for playback (RESTORER)
• Such compressed audio formats as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the
amount of data by eliminating signal components that are hard for the human ear to hear. The RESTORER
function generates the signals eliminated upon compression, restoring the sound to conditions near
those of the original sound before compression. It also corrects the sense of volume of the bass to obtain
richer sound with compressed audio signals.
• This can be set with analog signals or when a PCM signal (fs = 44.1/48 kHz) is input.
Setting contents
OFF : Do not use RESTORER.
Mode1 (RESTORER 64) : Optimized mode for compressed sources with very weak highs.
Mode2 (RESTORER 96) : Apply suitable bass and treble boost for all compressed sources.
Mode3 (RESTORER HQ) : Optimized mode for compressed sources with normal highs.
• The default setting for "iPod" is "Mode3" . All others are set to "OFF" .
• W hen set to something other than "OFF" , "
• This can also be set by pressing during playback.
OFF
(RESTORER 64)
(RESTORER HQ)

Adjusting the audio delay time while watching the picture

(Audio Delay)
Setting contents
0ms 200ms
~
• If you wish to adjust the "Audio Delay" while playing HDMI or component video signals, press
to set "OSD" to "OFF" . This way the audio delay can be adjusted while watching the picture. (Press
u
the again. The display switches to the display of the menu screen only.)
• This cannot be adjusted when playing in the EXT. IN, DIRECT or STEREO mode (with "Front
Speaker" set to "Large" , "Tone Control" to "OFF" and "MultEQ" and "RESTORER" to "OFF").
• When the Auto Lipsync Correction function is operating, you can set within the range 0 ~ 100 ms.
• Store "Audio Delay" for each input source.
Remote control
operation buttons
Adjusting the Sound Field Effect (Parameter)
Default settings are underlined.
" is displayed.
Mode 1 Mode 2
(RESTORER 96)
Mode 3
Default settings are underlined.
Displaying the menu
:
: Moves the cursor (Up/Down/Left/Right)
Cancel the menu

Checking the Status (Information)

Setting items
Status
Select Source / Surround Mode / Input Mode / Decode Mode / HDMI
/ Digital / Component / iPod Dock / Video Select / Source Level / i/p
Shows information about
Scaler / Resolution / Progressive Mode / Aspect
current settings.
You can also display current status on the main unit's display each time you
press
ZONE2
•
POWER/ Select Source/ Master Volume
Audio Input Signal Surround Mode : The currently set surround mode is displayed.
Signal : The input signal type is displayed.
Shows information about
fs : The input signal's sampling frequency is displayed.
audio input signals.
Format : The number of channels in the input signal (front, surround, LFE)
is displayed.
Offset : The dialogue normalization correction value is displayed.
Flag : This is displayed when inputting signals including a surround back
channel. "MATRIX" is displayed with Dolby Digital EX and DTS-ES Matrix
signals, "DISCRETE" with DTS-ES Discrete signals.
HDMI Information HDMI Signal Information
• Resolution / Color Space / Pixel Depth
Shows information about
HDMI input signals and
HDMI Monitor Information
monitor.
• Interface / Suport Resolution
Auto Surround Mode Analog/PCM / Digital 2ch / Digital 5.1ch / Multi CH
Shows information about
auto surround mode
settings.
Quick Select Quick Select 1 / Quick Select 2 / Quick Select 3
• N ame / Input Source / Video Select / Volume Level / MultEQ /
Shows information about
Dynamic EQ / Dynamic Vol / Front SP / Analog/PCM / Digital 2ch /
quick select settings.
Digital 5.1ch / Multi CH
ZONE2 Quick Select
Quick Select 1 Source / Quick Select 1 Volume / Quick Select 1 Name
Quick Select 2 Source / Quick Select 2 Volume / Quick Select 2 Name
Quick Select 3 Source / Quick Select 3 Volume / Quick Select 3 Name
u
Preset Channel A 1 ~ G 8
Shows information about • T UNER / SIRIUS
preset channels.
: Decision the setting
Setting contents
on the main unit.
: Return to previous menu
ENGLISH
8