Page 1
Version simplifiée Simple Versión sencilla version Version basique Basic Versión básica version AV SURROUND RECEIVER Version avancée Advanced AVR-1911 Versión avanzada version Owner’s Manual Manuel de l’Utilisateur Manual del usuario “Part names and functions” Information (vpage 67) Informations “Nomenclature et fonctions“...
Install in accordance with the manufacturer’s instructions. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. approved by DENON may void your authority, granted by the FCC, to use Do not install near any heat sources such as radiators, heat registers, the product.
ENGLISH FRANCAIS ESPAÑOL n CAUTIONS ON INSTALLATION NOTES ON USE / OBSERVATIONS RELATIVES A L’UTILISATION / NOTAS SOBRE EL USO PRÉCAUTIONS D’INSTALLATION WARNINGS AVERTISSEMENTS ADVERTENCIAS EMPLAZAMIENTO DE LA INSTALACIÓN • Avoid high temperatures. • Eviter des températures élevées. • Evite altas temperaturas. Allow for sufficient heat dispersion when Tenir compte d’une dispersion de chaleur Permite la suficiente dispersión del calor cuando...
ENGLISH Getting started Thank you for purchasing this DENON product. To ensure proper operation, please read these owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference. Contents Accessories Advanced version ·······························································31 Getting started ··············································································1...
ENGLISH Features Cautions on handling • Before turning the power switch on Fully discrete, identical quality and power for all Auto setup function Check once again that all connections are correct and that there are 7 channels (125 W x 7ch) The unit is provided with an “Auto setup function”...
ENGLISH Simple Simple version (Simple setup guide) version Here, we explain the entire setup procedure, from unboxing the unit to using it in a home theater. The “Simple version” describes the installation, connection and setup methods for 5.1-channel speakers. See page 32 for the installation, connection and setup methods for speakers other than 5.1-channel speakers. n Before connecting the unit, turn off the power to all devices.
Page 7
ENGLISH Install Connect NOTE This unit can perform 2.0/2.1 to 7.1-channel surround playback. Speakers • Connect so that the speaker cable core wires Here, we explain setup using the example of 5.1-channel speaker do not protrude from the speaker terminal. The protection circuit may be activated if the Carefully check the left (L) and right (R) playback.
Page 8
ENGLISH Connect Blu-ray Disc player and TV Use only an HDMI (High Definition Multimedia Interface) cable that bears the HDMI logo (a certified HDMI product). Using a cable without the HDMI logo (an uncertified HDMI product) may result in abnormal playback. When outputting Deep Color or 1080p, etc., we recommend you use a “High Speed HDMI cable or a “High Speed HDMI cable with Ethernet...
Page 9
ENGLISH Set up speakers Turn on power (Audyssey ® Auto Setup) 7XUQ RQ WKH 79 DQG VXEZRRIHU SRZHU The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey Auto Setup”.
ENGLISH Set up speakers (Audyssey ® Auto Setup) About setup microphone placement Set up the microphone Set up the remote control unit 0RXQW WKH VHWXS PLFURSKRQH RQ D WULSRG RU VWDQG n Set up the zone mode • Measurements are performed by placing the setup microphone DQG SODFH LW LQ WKH PDLQ OLVWHQLQJ SRVLWLRQ 3UHVV WR VZLWFK WKH ]RQH PRGH WR...
Page 11
ENGLISH Set up speakers (Audyssey ® Auto Setup) Step 1 Step 2 Preparation Speaker Detection Measurement • In step 1, you will perform measurements at the main listening position. • In step 2, you will perform measurements at &RQQHFW WKH VHWXS PLFURSKRQH WR WKH •...
Page 12
ENGLISH Set up speakers (Audyssey ® Auto Setup) Step 3 Step 4 Step 5 Finish Calculating Check Store 8QSOXJ WKH VHWXS PLFURSKRQH IURP WR VHOHFW WKH LWHP \RX ZDQW WR VHOHFW ³6WRUH´ DQG WKHQ 2Q WKH VFUHHQ XVH Step 2 WKH XQLW¶V 6(783 0,&...
ENGLISH Error messages Parameter Check An error message is displayed if Audyssey ® Auto Setup could not be completed due to speaker placement, the measurement environment, etc. This function enables you to check the measurement results and If this happens, check the relevant items, be sure to take the necessary measures, then perform Audyssey Auto Setup over again. equalizer characteristics after Audyssey Auto Setup.
Page 14
ENGLISH Play back disc When power is switched to standby 3UHVV WR VZLWFK DQ LQSXW VRXUFH POWER OFF Press IRU D SOD\HU XVHG IRU SOD\EDFN GPower indicator status in standby modeH 3OD\ WKH FRPSRQHQW FRQQHFWHG WR • Normal standby : Off WKLV XQLW •...
ENGLISH Basic version Basic version Here, we explain the connections and basic operation methods for this unit. F Connections vpage 13 F Playback (Basic operation) vpage 20 F Selecting a listening mode (Surround mode) vpage 28 n Refer to the pages indicated below for information on connecting and playing back the various media and external devices.
ENGLISH Connections Important information • Make connections as follows before using this unit. Select an appropriate connection type NOTE according to the components to be connected. • Do not plug in the power cord until all connections have been completed. •...
ENGLISH Important information Connecting an HDMI-compatible device How the on-screen display appears in accordance with the video You can connect up to five HDMI-compatible devices to the unit. input signal HDMI function The way the on-screen display of the menus, status, etc., is displayed differs according to the type of video This unit supports the following HDMI functions: signal input to this unit.
Page 18
ENGLISH Connecting an HDMI-compatible device About ARC (Audio return channel) function The Audio Return Channel in HDMI 1.4 enables a TV, via a single HDMI cable, to send audio data • When this unit is connected to other devices with HDMI cables, connect this unit and TV also with an “upstream”...
ENGLISH Connecting a TV Connecting a Blu-ray Disc player / DVD player • Select the connector to use and connect the device. • You can enjoy video and audio from a Blu-ray Disc or DVD. • For video connections, see “Converting input video signals for output (Video conversion function)” •...
ENGLISH Connecting a set-top box (Satellite tuner/cable TV) Connecting a digital camcorder • You can enjoy video and audio from a digital camcorder. • You can watch satellite or cable TV. • Select the connector to use and connect the device. •...
DENON control dock for iPod. • When you want to playback a video file stored on an iPod, use a DENON control dock for iPod (ASD-1R, ASD-11R, ASD-3N, ASD-3W, ASD-51N and ASD-51W, sold separately) (vpage 18 “Connecting a control in Set as Necessary dock for iPod”).
ENGLISH Connecting a CD player Connecting an antenna • You can enjoy CD sound. n Using the AM loop antenna Connecting an HD Radio receiver • Select the connector to use and connect the device. To use suspended on a wall •...
ENGLISH Connecting an external control Playback (Basic operation) device n Using the “Source Select” menu REMOTE CONTROL jacks SOURCE SELECT n Selecting the input source (vpage 20) Press Display the “Source Select” menu. n Adjusting the master volume (vpage 21) If this unit is installed in a location that is out of range of the signal Source Select n Turning off the sound temporarily (vpage 21) from the remote control unit, you can still operate the unit and the...
ENGLISH Important information Playing a Blu-ray Disc player/DVD Adjusting the master volume player VOL df WR DGMXVW WKH YROXPH The following describes the procedure for playing Blu-ray Disc player/ DVD player. n When the “Volume Display” setting 3UHSDUH IRU SOD\EDFN (vpage 59) is “Relative”...
Connect the DENON control dock for iPod to this unit functions may not operate. (vpage 18 “Connecting a control dock for iPod”). • Note that DENON will accept no responsibility whatsoever for any Display mode Browse mode Remote mode Set the iPod ®...
Page 26
ENGLISH Playing an iPod ® n Viewing photos and videos on an iPod ® in the n iPod operation Remote mode Operation buttons Function This unit can play back on a TV screen photos and data stored on an MENU Amp menu iPod equipped with a slide show or video function.
Page 27
• There are two modes for displaying the contents recorded on the You can use the USB cable provided with the iPod ® to connect the • Note that DENON will accept no responsibility whatsoever for any iPod. problems arising with the data on an iPod when using this unit in iPod with the unit’s USB port and enjoy music stored on the iPod.
ENGLISH Playing an iPod ® Tuning in radio stations iPod play function Important information iPod PLAY is pressed when power of this unit is on standby and a • If the desired station cannot be tuned in with auto tuning, tune it in control dock for iPod or an iPod is connected, the iPod starts playback.
Page 29
ENGLISH Tuning in radio stations n Presetting radio stations (Manual preset) n Check the HD Radio reception information n Listening to preset stations Your favorite broadcast stations can be preset so that you can tune 3UHVV ZKLOH DQ +' 5DGLR STATUS 3UHVV WR VHOHFW WKH PHPRU\...
32/44.1/48 kHz 16 – 320 kbps .m4a • Note that DENON will accept no responsibility whatsoever for any problems arising with the data on a USB memory device when using this unit in conjunction with the USB memory device. • USB memory devices will not work via a USB hub.
DENON original The surround effects suitable for the source type or according to your Surround surround playback liking can be selected from the DENON original sound mode and is used (vpage 30) for playback. Multi channel This mode is for 7.1-channel surround playback DOLBY PLgz using the front height speakers.
Page 32
ENGLISH Standard playback Displaying the currently playing surround mode GViews on the displayH 6HOHFW WKH PRGH FRUUHVSRQGLQJ WR WKH SOD\EDFN FRQWHQWV ZLWK WKH PHQX ³6XUURXQG 3DUDPHWHU´ ± Input signal Surround mode Display ³0RGH´ vSDJH WR HQMR\ \RXU IDYRULWH VRXQG DOLBY DIGITAL DOLBY DIGITAL DOLBY DIGITAL EX...
In this case, try other modes to achieve a sound field suited to your tastes. NOTE When the input signal is Dolby TrueHD, Dolby Digital Plus, DTS-HD or DTS Express, you cannot select DENON original surround mode.
ENGLISH Advanced version Advanced version Here, we explain functions and operations that let you make better use of this unit. F Speaker installation/connection (Other than 5.1-channel) vpage 32 F Playback (Advanced operation) vpage 36 F Playback in ZONE2 (Separate room) vpage 39 F How to make detailed settings vpage 41 F Operating the connected devices by remote control unit vpage 62...
ENGLISH Speaker installation/connection (Other than 5.1-channel) Here we describe the installation, connection and setup methods for speakers other than 5.1-channel speakers. For the installation, connection and setup methods for 5.1-channel speakers, see “Simple version (Simple setup guide)” (vpage 3). When 7.1ch (Front height speaker) installed When 6.1ch (Surround back speaker) installed Procedure for speaker settings Install...
ENGLISH 7.1-channel/6.1-channel (Surround back speaker) connection Connect For 7.1-channel (Surround back speaker) playback, set “Amp Assign” in “Set up speakers” (vpage 35) to • For the method of connecting 5.1-channel speakers, see page 4. “Normal”. • For the method of connecting the TV, see page 5. 7.1-channel (Front height speaker) connection For 7.1-channel (Front height speaker) playback, set “Amp Assign”...
Page 37
ENGLISH Connect Front A/B connection 2.1-channel/2-channel connection Bi-amp connection The second set of front speakers can be connected to the SURR. A bi-amp connection is to connect separate amplifiers to the tweeter BACK/AMP ASSIGN terminals. terminals and woofer terminals of speakers compatible with the In this case, set “Amp Assign”...
ENGLISH Set up speakers around items indicate the settings. Here we describe how to set up speakers other than 5.1-channel speakers. For the method of setting up 5.1-channel speakers, see “Simple version”, “Set up speakers (Audyssey ® Auto Setup)” (vpage 6). First install and connect the speakers to this unit.
ENGLISH Playback (Advanced operation) Convenient functions 6HW WKH +'0, RXWSXW FRQQHFWRU FRUUHVSRQGLQJ ZLWK Playback (Basic operation) (vpage 20) WKH +'0, FRQWURO IXQFWLRQ Set “HDMI Control” (vpage 57) to “ON“. HDMI control function Selecting a listening mode (Surround mode) 7XUQ WKH SRZHU RQ IRU DOO WKH HTXLSPHQW FRQQHFWHG (vpage 28) When you make an HDMI connection with a TV or player compatible E\ +'0, FDEOH...
ENGLISH Convenient functions n Adjusting the volume of groups of speakers Sleep timer function Adjusting the volume of the speakers (Fader function) The power automatically goes into standby once the set time has You can adjust the channel level either according to the playback This function lets you adjust (fade) the sound all at once from the elapsed.
Page 41
ENGLISH Convenient functions Quick select function • The Quick Select function can be set separately for the different All of the settings in step 1 can be memorized together. By memorizing zones (vpage 40 “Quick select function”). frequently used settings, you can quickly access and enjoy a playback QUICK SELECT •...
ENGLISH Playback in ZONE2 (Separate room) • You can operate this unit so as to enjoy audio in a different room w ZONE2 playback by audio output Playback (ZONE2) other than the MAIN ZONE (room where the unit is located). •...
ENGLISH Playback Quick select function Adjusting the volume It is also possible to save three settings for ZONE2. VOL df to adjust the volume. n Saving the settings GAdjustable rangeH – – – –80dB – –40dB – 18dB 6HW WKH LWHPV EHORZ WR WKH VHWWLQJV (When the “Volume Display”...
ENGLISH How to make detailed settings Menu map Setting items Number Detailed items Description Page 1. Audio Adjust Surround Parameter Adjuts surround sound parameters. For menu operation, connect a TV to this unit and Tone Adjuts the tonal quality of the sound. 1.Audio Adjust display the menu on the TV screen.
ENGLISH Examples of on-screen display and front display Below we describe typical examples of displays on the TV screen and on the set’s display window. On-screen Display Front Display Description Top menu display q The menu items are displayed here. MENU w The selected line is displayed here.
“Preset Name” (vpage 4 6), “Rename” (vpage 4 8), “Zone Rename” Using the number buttons Example: For changing the input source from “DVD” to “DENON” (vpage 60) and “Quick Select Name” (vpage 59)can be changed as q Place the cursor at “V”.
ENGLISH Inputting characters Input Setup Keyboard screen 'LVSOD\ WKH VFUHHQ IRU LQSXWWLQJ FKDUDFWHUV Perform settings related to input source playback. vSDJH ³0HQX PDS´ • You do not have to change the settings to use the unit. Make n Display of a keyboard input screen settings when needed.
ENGLISH Input Setup Items that can be set with the Input Setup procedure Important information Auto Preset (vpage 45) Preset Skip (vpage 45) Preset Name (vpage 46) n About the display of input sources 5-1.Auto Preset 5-2.Preset Skip 5-3.Preset Name Block Block: In this section, the configurable input sources for each item are shown as follows. Auto Tuning A Block Presets: ON A1FM 87.50MHz:...
ENGLISH Input Setup Preset Name Setting items Setting details HDMI HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 Assign a name to a preset memory. Set this to change the HDMI None : Do not assign an HDMI input connector to the selected input Setting items Setting details input connectors assigned...
Page 50
ENGLISH Input Setup Setting items Setting details Setting items Setting details Component Comp1 (Component video) Video Mode Set this to change the None : Do not assign a component video input connector to the selected (Continued) • If “Video Mode” is set to “Auto”, the mode is switched according to the component video input input source.
• Normally set this mode to “Auto”. Set “PCM” and “DTS” when OFF : Shuffle playback mode is canceled. inputting the corresponding input signal. n For iPod playback (When DENON control dock for iPod ASD-3N, ASD- 3W, ASD-51N or ASD-51W is connected) ON : Shuffle playback mode is enabled.
ENGLISH Surround Parameter Audio Adjust Default settings are underlined. The sound being played in the surround mode can be adjusted to your liking. Adjust surround sound parameters. It may not be possible to set this item depending on the input signal. The items (parameters) that can be adjusted depend on the signal being input and the currently Setting items Setting details...
Page 53
ENGLISH Audio Adjust Setting items Setting details Setting items Setting details n For 2-channel sources Panorama ON : Set. S.Back Assign front L/R signal also OFF : Do not set. Sets the method of ON : The surround back channel is used. to surround channels for generating of the surround OFF : No signal is played from the surround back channels.
ENGLISH Audio Adjust Audyssey Settings Setting items Setting details Default settings are underlined. Height Gain Low : Reduce the front height channel volume. Set MultEQ ® , Dynamic EQ ® and Dynamic Volume™. These can be selected after Audyssey ® Auto Setup Control the front height Mid : Front height channel sound is output with standard sound volume.
Page 55
ENGLISH Audio Adjust Setting items Setting details Setting items Setting details Dynamic EQ ® ON : Use Dynamic EQ. Dynamic Volume™ Midnight : Most adjustment to softest and loudest sounds. Solve the problem of OFF : Do not use Dynamic EQ. Solve the problem of large Evening : Medium adjustment to loudest and softest sound.
ENGLISH Audio Adjust Manual EQ RESTORER Default settings are underlined. Use the graphic equalizer to adjust the tone of each speaker. Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the “Manual EQ” can be set when “MultEQ ® ” setting (vpage 51) is “Manual”. amount of data by eliminating signal components that are hard for the human ear to hear.
ENGLISH Speaker Setup Manual Setup Default settings are underlined. Set when changing Audyssey ® Auto Setup settings, or when changing the audio, video, display Perform when setting the speakers manually or when changing settings made in Audyssey Auto Setup. or other settings. •...
Page 58
ENGLISH Manual Setup Setting items Setting details Setting items Setting details Speaker Config. Surround : Set the presence and size of the surround speakers. Bass Setting Subwoofer Mode : Select low range signals to be reproduced by (Continued) • Large : Use a large speaker that can adequately play back low Set subwoofer and LFE subwoofer.
Page 59
ENGLISH Manual Setup Setting items Setting details Setting items Setting details Channel Level Test Tone Start : Output test tone. Front Speaker Setup DIRECT/STEREO : The front speakers used in the direct, stereo and pure Set the volume of the test •...
ENGLISH Manual Setup HDMI Setup Audio Setup Default settings are underlined. Default settings are underlined. Make settings for HDMI video/audio output. Make settings for audio playback. Setting items Setting details Setting items Setting details Auto Lip Sync ON : Compensated. 2ch DIRECT/STEREO Setting : Select the method for setting the speakers used in the 2-channel Make automatic...
ENGLISH Manual Setup ZONE2 Setup Setting items Setting details Default settings are underlined. 2ch DIRECT/STEREO Distance FL / Distance FR : Select the speaker. Set the audio to play back with ZONE2. (Continued) • 0.0ft – 60.0ft (12.0ft) / 0.00m – 18.00m (3.60m) : Set the distance to “ZONE2 Setup”...
ENGLISH Manual Setup Option Setup Setting items Setting details Default settings are underlined. On-Screen Display Master Volume : Display the master volume during adjustment. Make various other settings. (Continued) • Bottom : Display at the bottom. • Top : Display at the top. Setting items Setting details •...
Page 63
ENGLISH Manual Setup Setting items Setting details Setting items Setting details Quick Select Name Template : The display name can be changed by selecting “Operation” Setup Lock ON : Turn protection on. (Continued) and “Device Name” from the previously set templates. Protect settings from OFF : Turn protection off.
ENGLISH Items Setting details Information Quick Select Quick Select 1 / Quick Select 2 / Quick Select 3 / ZONE2 Quick Select Show information about receiver settings, input signals, etc. Show information about 1 / ZONE2 Quick Select 2 / ZONE2 Quick Select 3 •...
• For menu operation by pressing buttons CH LEVEL • For setting the channel level of the unit by pressing Blu-ray Disc player DENON 32258 ZONE/DEVICE • For turning power in each zone on or off by pressing ZONE/DEVICE OFF...
Page 66
³5HPRWH 3UHVHW &RGHV´ DQG WKHQ Press the buttons with an interval less than 10 seconds. 3UHVVLQJ ui VHOHFW WKH EUDQG QDPH 7KHQ SUHVV SUHVV ENTER Category :DVD ENTER Brand :DENON 4-5.Option Setup Code[1/3]:30490 Brand[1/1] - DVD - Setup Remote 1.Volume Control 1.Press [Source]button.
ENGLISH Registering preset codes Operating components 7KH VFUHHQ VKRZQ EHORZ LV GLVSOD\HG DQG UHJLVWUDWLRQ The supplied remote control unit can control a component other than n CD player / CD recorder operation RI WKH SUHVHW FRGH LV FRPSOHWHG this unit. Operation buttons Function 6ZLWFK WKH LQSXW VRXUFH...
ENGLISH Operating components Specifying the zone used with the Resetting the remote control unit n TV operation remote control unit Settings for the remote control unit are returned to the default setting. Operation buttons Function ZONE SELECT 3UHVV DQG KROG When the button is pressed, only the set zone can be POWER ON...
ENGLISH Information Information Here, we list various information related to this unit. Please refer to this information as needed. F Part names and functions vpage 67 F Other information vpage 71 F Troubleshooting vpage 78 F Specifications vpage 80 F Index vpage 81...
ENGLISH Part names and functions Front panel Display For buttons not explained here, see the page indicated in parentheses ( ). W0 W1 W2 W4 W5 W6 W7 W8 Decoder indicators AUDYSSEY MULTEQ indicators These light when the respective decoders are Lighting is as follows, depending on the setting operating.
ENGLISH Rear panel See the page indicated in parentheses ( ). ZONE2 connectors ·································································· (39) Speaker terminals ························································· (5, 33, 34) NOTE HD Radio antenna terminals ·················································· (19) AC inlet (AC IN) ·········································································· (5) Do not touch the inner pins of the connectors on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
ENGLISH Remote control unit For buttons not explained here, see the page indicated in parentheses ( ). ZONE/DEVICE power buttons ············ (39, 62) ENTER button ····································· (42 – 44) Zone mode indicators ·························· (39, 62) RESTORER button ······································ (53) Input source select buttons ················· (20, 39) Pure direct button (PURE) ·························...
ENGLISH Remote control unit Inserting the batteries Operating range of the remote control unit Point the remote control unit at the remote sensor when operating it. q Slide the rear lid in the w Load the two batteries direction of the arrow and properly as indicated by remove it.
ENGLISH Other information Trademark information “Made for iPod” means that an electronic n Trademark information (vpage 71) accessory has been designed to connect This product uses the following technologies: n Surround (vpage 72) specifically iPod been certified by the developer to meet Apple n Explanation of terms (vpage 76) Manufactured under license from Dolby performance standards.
ENGLISH Surround This unit is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater. Surround modes and surround parameters This table shows the speakers that can be used in each surround mode and the surround parameters adjustable in each surround mode. Symbols in the table S This indicates the audio output channels or surround parameters that can be set.
Page 76
ENGLISH Surround Surround Parameter (vpage 49) Audyssey Settings z20 (vpage 51) NEO:6 Music PRO LOGIC g/gx Music mode only mode only Tone RESTORER AFDM Front Height Surround mode (vpage 28) S.Back Height Gain Subwoofer Dynamic Dynamic EQ ® (vpage 51) (vpage 53) MultEQ ® (vpage 50) (vpage 51) (vpage 51) Panorama...
Page 77
ENGLISH Surround n Types of input signals, and corresponding surround modes This table shows the input signal that can be played in each surround mode. Check the audio signal of the input source then select the surround mode. Symbols in the table F This indicates the default surround mode.
Page 78
ENGLISH Surround Input signal types and formats DTS-HD DOLBY DOLBY DIGITAL DTS-HD DOLBY Surround mode (vpage 28) NOTE DTS-HD DTS ES DTS ES DOLBY DOLBY DOLBY DOLBY ANALOG LINEAR PCM LINEAR PCM High DOLBY DOLBY DIGITAL EX Master DSCRT MTRX DTS 96/24 DIGITAL EX DIGITAL DIGITAL...
ENGLISH Explanation of terms Dolby Pro Logic gx Dolby Digital DTS Digital Surround Dolby Digital is a multi-channel digital signal format Dolby Pro Logic gx is a further improved version of DTS Digital Surround is the standard digital surround Adobe RGB color / Adobe YCC601 color the Dolby Pro Logic g matrix decoding technology.
Page 80
ENGLISH Explanation of terms DTS NEO:6™ Surround DTS NEO:6™ is a matrix decoding technology Progressive (sequential scanning) x.v.Color achieving 6.1-channel surround playback This is a scanning system of video signal that This function lets HDTVs display colors more with 2-channel sources. It includes “DTS NEO:6 displays 1 frame of video as one image.
• Set “Speaker Config.” – “Subwoofer” on the menu to “Yes”. power, the power contact the DENON service adviser. • If “Front” and “Center” for “Speaker Config.” are set to “Large”, indicator is blinking and “Subwoofer Mode” is set to “LFE”, no sound may be output...
Page 82
ENGLISH GHDMIH GUSB memory deviceH Symptom Cause/Solution Page Symptom Cause/Solution Page No audio is • Check the connection of the HDMI connectors. When a USB • The set cannot recognize a USB memory device. Check the output with HDMI • When outputting HDMI audio from the speakers, set “HDMI memory device is connection.
ENGLISH Resetting the microprocessor Specifications Perform this procedure if the display is abnormal or if operations cannot be performed. When the microprocessor is reset, all the settings are reset to their default values. n Audio section SURROUND MODE 1 ON/STANDBY •...
Page 84
Auto Preset ························································ 45 Blu-ray Disc player ··········································· 21 Deep Color ··················································· 14, 76 Auto Setup ····················································· 6, 35 CD player ························································· 21 DENON original surround mode ························· 30 Auto Surround Mode ·········································· 58 Direct ······························································· 30 Dimension ·························································· 50 Information ························································· 61 DVD player ·······················································...
Page 85
ENGLISH Progressive Mode ·············································· 47 Protection circuit ················································ 77 Tone ··································································· 51 Tone Control ······················································· 51 Trademark ·························································· 71 Quick select ················································· 38, 40 Treble ································································· 51 Quick Select Name ············································ 59 Turn off power (standby) ···································· 11 Turn on power ······················································ 6 Rear panel ··························································...
Page 86
D&M Holdings Inc. Printed in China 5411 10417 006D...