Scan Was Not Successful; Scanning Takes Too Long Or Freezes The Computer - Lexmark 13R0245 - X6575 USB 2.0/PictBridge/ 802.11g All-in-One Color Printer Scanner Copier Fax Photo Setup Manual

Check printer default and pause settings
1
Do one of the following:
•
In Windows Vista, click
•
In Windows XP, click Start.
2
Click Printer or Printers and Faxes.
3
Double-click the printer you want to check.
4
Click Printer.
5
Make sure no check mark appears next to Pause Printing. If a check mark appears next to Set As Default Printer,
you must select the correct printer from a list each time you print.
Removing and reinstalling the software
For more information, see "Removing and reinstalling the software" on page 141.

Scan was not successful

These are possible solutions. Try one or more of the following:
Check USB cable connection
1
Check the USB cable for any obvious damage.
2
Firmly plug the square end of the USB cable into the back of the printer.
3
Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with the
Restart computer
Turn off and then restart your computer.

Scanning takes too long or freezes the computer

These are possible solutions. Try one or more of the following:
Close other software
Close all programs not being used.
Change the scanning resolution to a lower value
1
Load an original document facedown on the scanner glass.
2
From the desktop, double-click the Productivity Studio icon.
3
From the Welcome Screen, click Scan.
4
Click Custom Settings.
5
From the Scan Resolution drop-down list, select a lower scan resolution.
6
Click Start.
Control Panel.
USB symbol.
181