Saving Settings - Lexmark 13R0245 - X6575 USB 2.0/PictBridge/ 802.11g All-in-One Color Printer Scanner Copier Fax Photo Setup Manual

Press
1 A keypad number or symbol In Copy mode or Photo Card mode: Enter the number of copies or prints you
Auto Answer
2
Redial / Pause
3
4 Phone Book
5 Start Color
6 Start Black

Saving settings

In a setting menu, an * appears next to the default setting. To change the setting:
1
From the control panel, press Settings.
2
Press or repeatedly until the setting you want appears.
3
Press :
•
To save most settings. An * appears next to the saved setting.
•
To select a temporary setting. An * appears next to the selected setting.
Note: The printer reverts to the default setting after two minutes of inactivity or if the printer is turned off.
The Photo Card settings will not time out after two minutes of inactivity or turning off the power but will return
to the default settings when a memory card or flash drive is removed.
1
To
want to make.
In Fax mode:
•
Enter fax numbers.
•
Navigate an automated answering system.
•
Select letters when creating a Speed Dial list.
•
Type numbers to enter or edit the date and time shown on the display.
Set the printer to answer all incoming calls when the button light is on.
In Fax mode:
•
Display the last number dialed. Press
dialed.
•
Insert a three-second pause in the number to be dialed to wait for an
outside line or get through an automated answering system. Enter a pause
only when you have already begun entering the number.
Access any of the programmed Speed Dial numbers (1–89) or Group Dial
numbers (90–99).
Start a color copy, scan, fax, or photo print job, depending on which mode is
selected.
Start a black-and-white copy, scan, fax, or photo print job, depending on which
mode is selected.
39
2
5
3
6
4
or to view the last five numbers