Checking Printer Readiness; Checking The Spool Settings For Banner Printing; Resolving Font Problems - Lexmark 13R0245 - X6575 USB 2.0/PictBridge/ 802.11g All-in-One Color Printer Scanner Copier Fax Photo Setup Manual

Setup guide
Hide thumbs Also See for 13R0245 - X6575 USB 2.0/PictBridge/ 802.11g All-in-One Color Printer Scanner Copier Fax Photo:
Table of Contents

Advertisement

Checking printer readiness

The printer may not be ready to print. Check the following. When you think you have solved the problem, test the
solution by sending a document to print.
Make sure the printer has paper and is properly loaded
Make sure you have followed the correct loading instructions for your printer.
Remove the sticker and tape from the print cartridges
1
Lift the scanner unit.
2
Remove the print cartridges from the print cartridge carrier.
3
Make sure the sticker and tape are removed from the bottom and back of the cartridges.
Do the print cartridges have ink?
1
Do one of the following:
In Windows Vista, click
In Windows XP and earlier, click Start.
2
Click Start
Programs or All Programs
3
Click Solution Center.
If an exclamation point (!) appears on either of the print cartridges, the ink level is low. Install a new cartridge.
Check the USB connection
1
Check that the USB cable is connected to the computer. The USB port on the back of the computer is marked
by the
USB symbol. Plug the long, flat end of the USB cable into this port.
2
Make sure that the smaller, more square end of the USB cable is plugged into the back of the printer.
3
Check that the USB cable is not damaged and that the

Checking the Spool Settings for banner printing

Banner printing is not possible if certain Spool Settings are selected. Verify that you have the right settings selected.
1
Click Start
Settings
2
Right-click the Lexmark 6500 Series icon.
3
Select Properties.
4
Click the Advanced tab.
5
At the bottom of the Advanced tab, click Print Processor.
6
Verify that the Default data type is LEMF. If it is not, select LEMF from the available choices, and then click
OK.

Resolving font problems

Have you applied the fonts correctly in the program?
Most programs do not print a stretched or resized font.
.
Lexmark 6500 Series.
Printers or Printers and Faxes.
light is on.
164

Advertisement

Table of Contents
loading

This manual is also suitable for:

13r0245 x6575 2.0/pictbridge/

Table of Contents