Ping The Access Point; Ping The Printer - Lexmark 13R0245 - X6575 USB 2.0/PictBridge/ 802.11g All-in-One Color Printer Scanner Copier Fax Photo Setup Manual

Setup guide
Hide thumbs Also See for 13R0245 - X6575 USB 2.0/PictBridge/ 802.11g All-in-One Color Printer Scanner Copier Fax Photo:
Table of Contents

Advertisement

If you set a new network name, you must reset the printer and computer SSID to the same network name.
To reset the computer network name, see the documentation that came with your computer.
To reset the printer name:
1
Click Start
Programs or All Programs
2
Click Wireless Setup Utility.
3
Follow the instructions on the computer screen, and enter the new network name when prompted.

Ping the access point

1
If you do not already know it, find the IP address of the wireless access point (wireless router).
a
Do one of the following:
In Windows Vista, click
In Windows XP, click Start
b
Type ipconfig.
c
Press Enter.
The "Default Gateway" entry is typically the wireless access point (wireless router).
The IP address appears as four sets of numbers separated by periods, such as 192.168.0.100.
2
Ping the wireless access point (wireless router).
a
Do one of the following:
In Windows Vista, click
In Windows XP, click Start
b
Type ping followed by a space and the IP address of the wireless access point (wireless router). For
example:
ping 192.168.0.100
c
Press Enter.
3
If the wireless access point (wireless router) responds, you will see several lines appear that start with "Reply
from". Turn off and restart the printer.
4
If the wireless access point (wireless router) does not respond, after several seconds you will see "Request
timed out."
a
Do one of the following:
In Windows Vista, click the
Center.
In Windows XP, click Start
b
Select the appropriate connection from the ones shown.
Note: If the computer is connected to the access point (router) by an Ethernet cable, the connection may
not include the word "wireless" in its name.
c
Right-click the connection, and then click Repair.

Ping the printer

1
Do one of the following:
In Windows Vista, click
In Windows XP, click Start
Lexmark 6500 Series.
All Programs
Accessories
Programs or All Programs
All Programs
Accessories
Programs or All Programs
Control Panel
Settings or Control Panel
All Programs
Accessories
Programs or All Programs
152
Command Prompt.
Accessories
Command Prompt.
Accessories
Network and Internet
Network Connection.
Command Prompt.
Accessories
Command Prompt.
Command Prompt.
Command Prompt.
Network and Sharing

Advertisement

Table of Contents
loading

This manual is also suitable for:

13r0245 x6575 2.0/pictbridge/

Table of Contents