Experiencing Poor Quality Or Incorrect Output; Cannot Print To The Network Printer - Lexmark 13R0245 - X6575 USB 2.0/PictBridge/ 802.11g All-in-One Color Printer Scanner Copier Fax Photo Setup Manual

Setup guide
Hide thumbs Also See for 13R0245 - X6575 USB 2.0/PictBridge/ 802.11g All-in-One Color Printer Scanner Copier Fax Photo:
Table of Contents

Advertisement

Make sure the external print server is working
If the printer is connected to an external print server, the problem may be with this print server. Check to make sure
the device is working properly and that the printer is connected to the network.

Experiencing poor quality or incorrect output

See the topic that best describes the problem.
Print is too dark or smudged
Vertical straight lines are not smooth
White lines appear in graphics or solid black areas
Characters are missing or unexpected
Colors on printout are faded or differ from colors on the screen
Printouts have alternating bands of light and dark print
Page prints with different fonts
Printed characters are improperly formed or are not aligned correctly at the left margin
Transparencies or photos contain white lines
Glossy photo paper or transparencies stick together

Cannot print to the network printer

These are possible solutions. Try one or more of the following:
Check print server setup documentation
See the print server documentation for setup instructions if:
The lights of the print server are not on.
The installation cable is not connected to the print server.
The print server is not connected to a power source.
Check USB connection
If you are also using an installation cable:
1
Check the installation cable for any obvious damage.
2
Firmly plug the rectangular end of the installation cable into the USB port of the computer.
The USB port is marked with the
3
Firmly plug the square end of the installation cable into the USB port on the back of the printer.
Contact network support
Contact your system support person to make sure the printer is connected to a working network connection.
Check power
Make sure the printer is connected to a power source and is turned on. For more information, see "Power button is
not lit" on page 138.
USB symbol.
171

Advertisement

Table of Contents
loading

This manual is also suitable for:

13r0245 x6575 2.0/pictbridge/

Table of Contents