Printer Is Configured Correctly, But Cannot Be Found On The Network; Wireless Network Printer Does Not Print - Lexmark 13R0245 - X6575 USB 2.0/PictBridge/ 802.11g All-in-One Color Printer Scanner Copier Fax Photo Setup Manual

Setup guide
Hide thumbs Also See for 13R0245 - X6575 USB 2.0/PictBridge/ 802.11g All-in-One Color Printer Scanner Copier Fax Photo:
Table of Contents

Advertisement

Printer is configured correctly, but cannot be found on the network

Make sure:
The printer has power and the
The printer is within range of the wireless network.
The printer is located away from other electronic devices that may interfere with the wireless signal.
Your wireless network is using a unique network name (SSID). If not, it is possible that the printer/print server
is communicating over a different, nearby network that uses the same network name.
The printer has a valid IP address on the network.

Wireless network printer does not print

These are possible solutions. Try one or more of the following:
Check power
Make sure the
light is on.
Check cable
Make sure the power cable is connected to the printer and to the electrical outlet.
Make sure the USB cable or the installation cable is not connected.
Check Wi-Fi indicator light
Make sure the Wi-Fi indicator light is green. If it is not green, see "Wi-Fi indicator light is orange" or "Wi-Fi indicator
light is blinking orange during installation" in "Wireless troubleshooting."
Check if printer driver is installed
Make sure the printer driver is installed on the computer from which you are sending the print job.
1
Do one of the following:
In Windows Vista, click:
In Windows XP, click:Start
In Windows 2000 and earlier, click: Start
If you cannot find the icon for your printer, then the printer driver is not installed.
2
If the printer driver is not installed, insert the installation software CD into your computer.
3
Follow the instructions on the computer screen.
Note: You must install the printer driver on each computer that uses the network printer.
Check if printer is connected to the wireless network
1
Print a network setup page. For more information, see "Printing a network setup page."
2
Check to see if "Status: Connected" appears under Network Card.
Reboot the computer
Turn off and restart the computer.
light is on.
Control Panel
Printers.
Settings
Printers and Faxes.
Settings
143
Printers.

Advertisement

Table of Contents
loading

This manual is also suitable for:

13r0245 x6575 2.0/pictbridge/

Table of Contents