Saving Paper Default Settings - Lexmark S400 Series User Manual

Load up to:
10 iron-on transfers
50 transparencies

Saving paper default settings

You can set the default paper size, paper type, and photo print size for the documents and photos that you print.
Note: These default settings apply only to print, copy, and scan jobs that you initiate from the printer.
1
From the printer control panel, press
2
Choose the default settings:
• If you want to set the default paper size:
a
Press to select Paper Setup.
b
Press the arrow buttons to scroll to Paper Size, and then press
c
Press the arrow buttons to select the default paper size for the printer, and then press
•
If you want to set the default paper type:
a
Press to select Paper Setup.
b
Press the arrow buttons to scroll to Paper Type, and then press
c
Press the arrow buttons to select the default paper type for the printer, and then press
•
If you want to set the default photo print size:
a
Press the arrow buttons to scroll to Defaults, and then press
b
Press to select Photo Print Size.
c
Press the arrow buttons to select the default photo print size for the printer, and then press
3
Press until you exit Setup, or press another mode button.
Make sure that:
•
You follow the loading instructions on the iron-on transfer
packaging.
•
The print side of the transfer is faceup.
•
The paper guides rest against the edges of the transfer.
•
You select Automatic, Normal, or Photo print quality.
•
The rough side of the transparencies is faceup.
•
The paper guides rest against the edges of the
transparencies.
.
Loading paper and original documents
31
.
.
.
.
.
.