Pedals; Pedal Assignments; Program Changes; Program Up & Down - DigiTech RP12 Owner's Manual

50

Pedals

Section 6 - Pedalboard Set-Up
¡Pedals
The option allows different functions to be assigned to
each of the pedals on the pedalboard.
• From Program mode, press the <UTILITY> button once.
• Press the Function button <MOD
¡Pedals ™CC Ped
£PrgList Assign≥
•Press Function button <MOD
¡Bank 1 ™Pedal 1
£[assignment]
There are 25 Banks available, each with 10 pedal assignments. As
you scroll through the Banks or Pedals, you will notice the pedal
assignment name and number located under option
£[assignment]
change according to each
Use Function button <MOD
scroll to the desired Bank. Function button <MIX
™Pedal #
option and allows you to scroll to the desired pedal in
that bank.

Pedal Assignments

There are seven types of pedal assignments. They are: Program
Changes, Program Up/Down, List Up/Down, Bank Up/Down, Toggle
CC (0-127), and CC Pedal (0-127). For a description of these func-
tions, refer to the RP-12 Functions section (pg 46).
Use Function button <MORE
option. At this point, press the <UP> and <DOWN> Parameter buttons
to ascend or descend through the RP-12's Program numbers until you
reach Program 256 . If you continue to press the Parameter buttons,
other assignments will be available in the following order:
£Program Up £Program Down
,
Down £Bank Up £Bank Down
,, ,
£CCPedal= CC 0-127
RP-12 Owner's Manual
¡
> once. The display reads:
¡
> again. The display reads:
1
™Pedal #
¡ ¡Bank #
> to select the
™
> selects the
£ £[assignment]
> to select the
£List Up
,
£Toggle CC 0-127
,
.
.
option and
£List
,
,