Equalizers - DigiTech RP12 Owner's Manual

RP-12 Owner's Manual

Equalizers

Module Name
10 Band GEQ
4Bnd ParamtrcEQ
Cabinet Emulator
Distortion Gain ..............Controls the amount of distortion produced by
Dist/Clean Level ............This Parameter allows two separate levels to
Module Abbrv. Description
GEQ10 Full bandwidth 10-band graphic equalizer
PEQ4 4-band parametric equalizer w/adjustable Q
CabEm Full-bore stack sound direct-to-console
The equalizer Modules provided in the RP-12 offer superb noise per-
formance, and allow accurate tonal shaping of many different types of
sound sources. A 4-band parametric equalizer with adjustable Q is
available in all Algorithms. The RP-12 also features a 10-band Graphic
Equalizer module. All equalizer Modules offer silent, accurate (double-
precision) tonal shaping.
Adjustable Q equalizers offer the ability to control the bandwidth of the
boost/cut ranges. High Q settings yield extremely narrow bandwidth,
where boost and cut have minimal effect on adjacent frequencies of
the program material. Low Q settings affect a wider number of frequen-
cies when the selected band is boosted or cut.
Program. Options are: OVERDRIVE - Solid-
state overdrive with extra punch. HEAVY SUS-
TAIN - Smooth, warm distortion sound with
lots of sustain. GRUNGE- High gain distortion
which is tight and highly focused for powerful
rhythms and leads.
the RP-12. High settings produce greater gain
and drive for effortless soloing, while low set-
tings offer better nuance and touch control.
Ranges from 0 to 11.0.
be set. If the Distortion is turned on, the
Distortion level can be adjusted. If the
Distortion is turned off, the Clean level can be
adjusted. Both level settings are saved when
the Program is stored. Settings include MUTE
or ranging from -60dB to +12dB.
Section 4 - Effects and Parameters
23