Using The Gnx3'S Recorder Panel For Recording; Recording A Track - DigiTech GNX3 User Manual

Recorder
Recording Time
The GNX3 is equipped with 16Meg of on-board recording memory. This gives you six total track minutes
available for recording in Normal Record Quality (three minutes in CD Record Quality and 12 minutes in
Economy Record Quality). Therefore, you can record one track for six minutes, two tracks for 3 minutes,
and so forth using Normal Quality . The number of songs that can be in memory is dependent on the total
amount of record time. For example, with an optional 128M Smart Media® card, the GNX3 has a total of 48
Normal quality track minutes available. This would be the equivalent of two – 3 minute 8-track songs or four
– 3 minute 4-track songs.

Using the GNX3's Recorder Panel for Recording

Recording a Track

When the GNX3 is first powered up, the recorder is immediately ready to use. The Song display reads 1,
indicating the first song is selected to record. To begin recording a track, follow these steps:
1. Press the RECORD button. The TRACK 1 button automatically lights red, indicating it is armed for
recording, and the recorder begins recording on this track. The TIME display begins counting off the
recording time.
2. Once recording is complete, press the STOP button. This stops the recording process. The display
saving
reads
and the TRACK 1 button automatically lights green indicating it is enabled for playback.
NOTE: Pressing the RECORD button when a track is not armed for recording will force the
GNX3's recorder to arm and begin recording on the next empty track of a song
(next pair of tracks when Stereo Record is enabled). You may arm any track(s) for
recording prior to pressing RECORD.
48
as the track is being saved to memory. The TIME display shows the elapsed time used,