Store The Preset - DigiTech GNX3 User Manual

5. Rotate the Parameter 3 knob to set the Reverb Decay to
6. Rotate the Parameter 4 knob to set the Reverb Damping to
7. Rotate the Parameter 5 knob to set the Reverb Level to

Store the Preset

The last step, is to store our changes to a User Preset. If we changed presets or turned the GNX3
off without storing these settings, it would forget what we had done and revert back to the original
preset. To store the preset, do the following:
1. Press STORE. The first letter in the display begins to flash. Since this is an example preset, let's
examplE
name the preset
2. Rotate the DATA WHEEL until the flashing character in the display is an
3. Press the RHYTHM button once and the second character begins to flash.
4. Rotate the DATA WHEEL again until the flashing character is an
button to select the character location and the Data Wheel to change the characters.
5. Once the Display reads
flashing.
6. Rotate the DATA WHEEL to select 48 as the destination.
7. Press STORE once more to save the preset.
Congratulations! You have successfully created a Preset.
.
exampLE
, press STORE again.The numbers in the red numeric display are
15
.
40
.
30
.
E
.
X
. Continue using the Rhythm
Tutorial
37