Select And Adjust The Chorus; Turn The Delay Off; Select And Adjust The Reverb - DigiTech GNX3 User Manual

Tutorial

Select and Adjust the Chorus

Next we wanted to thicken up the sound, by adding a subtle Chorus effect, in the following manner:
1. Press the EFFECT SELECT DOWN button again and the LED in the Chorus/Mod row lights.
2. If the display reads off (Of), press the STATUS button until the display reads on (On).
Chorus
3. Rotate the Parameter 1 knob until the display reads Chorus ( ) for the effect type.
5
4. Rotate the Parameter 2 knob to set the Chorus Speed to .
30
5. Rotate the Parameter 3 knob to set the Chorus Depth to .
50
6. Rotate the Parameter 5 knob to set the Chorus Level to .

Turn the Delay Off

To bypass the Delay, do the following:
1. Press the EFFECT SELECT DOWN button until the LED in the Delay row lights.
2. If the display reads on (On), press the STATUS button until the display reads off (Of).

Select and Adjust the Reverb

In our example preset we wanted a little bit of Hall Reverb to provide some ambience. To add the
reverb, do the following:
1. Press the EFFECT SELECT DOWN button until the LED in the Reverb row lights.
2. If the display reads off (Of), press the STATUS button until the display reads on (On).
Hall
3. Rotate the Parameter 1 knob to select Hall ( ) for the Reverb Type.
2
4. Rotate the Parameter 2 knob to set the Reverb Predelay to .
36