Stereo Operation; Direct To A Mixing Console - DigiTech GNX3 User Manual

Introduction
PAN / LEVEL SETUP REMAIN

Stereo Operation

1. Connect the guitar to the input of the GNX3.
2. Connect the GNX3's Left output to the input of one amplifier or channel of a power amp.
3. Connect the GNX3's right output to a second amplifier, or to a second channel of a power amp.
4. Select Stereo as the Output configuration from the Utility menu. See page 65 for more on
selecting the Output configuration.
PAN / LEVEL SETUP REMAIN

Direct to a Mixing Console

The GNX3 can be connected directly to the inputs of a house PA system, or a recording console.
1. Connect the guitar to the GNX3's input.
2. Connect the GNX3's outputs to the channel inputs of the mixing console.
3. If the GNX3 is used in Stereo configuration, set the pan controls of the mixer hard left and right,
and select Stereo as the output configuration from the Utility menu. See page 65 for more
information on on selection the Output configuration.
8