Completed Jobs Toolbar - Kyocera KM-F1050 User Manual

Completed Jobs Toolbar

Print Job Pages
KMnet Admin 2.0
Pages Printed
This column shows the number of pages of the document printed by the
selected device.
Total Pages
This column shows the entire number of pages in the document.
Monochrome
This column shows the number of monochrome (black and white) pages in the
document.
Color
This column shows the number of color pages in the document.
Submitted
This column shows the estimated time of completion for the print job in hours,
minutes, and seconds.
Actions
This column shows icons for the different operations you can perform on the
print job:
Click Delete to remove the print job from the queue.
Note: The selected print job is removed immediately. There is no
confirmation dialog box.
Click Reprint to print the document again, resulting in a new print job.
Authenticated non-administrative users can delete, or reprint only their own print
jobs.
Authenticated administrative users can delete any print job, but they can reprint
only their own print jobs.
Warning: When authentication is switched off, anyone can delete or reprint
any print job.
The Completed Jobs toolbars are at the top and bottom of the Completed
Jobs pane. In the top toolbar you can click commands to move through the
completed jobs pages. The bottom toolbar shows notifications about the
condition of the system.
Completed print jobs are organized into pages. Each page contains a
user-defined fixed number of print jobs. If the number of print jobs in the
selected queue does not exceed the user-defined limit for print jobs per page,
then page options are not shown. The Completed Jobs top toolbar contains
the following options for moving between pages of print jobs, and deleting all
jobs:
First Page
This option shows the first page of print jobs.
Previous
This option returns to the prior page of print jobs.
Currently Displayed Print Jobs
My Print Jobs
6-4