Changing The Default Console; Disabling A Console - Kyocera KM-F1050 User Manual

1
2

Changing the Default Console

1
2
3

Disabling a Console

1
2
3
4
KMnet Admin 2.0
If you installed all of the consoles, the available choices are:
Administration
A console for managing user accounts/roles, network discovery, and system
settings.
Device Manager
A console for managing device data, polling, alerts, and preferences.
Accounting Manager
A console for monitoring the various counters on your network printing
devices.
Print Job Manager
A console for print queue management and job control.
To choose a console:
In any console, click Switch Consoles.
Select the desired console from the list.
If you select Open the default console and log on to KMnet Admin, your
preferred console is displayed. By default, the preferred console is set to
Device Manager.
To change the default console:
Log on to KMnet Admin.
In the navigation area, click Switch Console, then select a default console.
Click Switch Console, then click Set As Default Console.
Your new preferred console is displayed each time you log on.
Disabling consoles you do not plan to use will simplify the KMnet Admin
appearance. The Administration and Device Manager consoles cannot be
disabled.
In the navigation area, select Consoles.
Select the console to disable from the list in the right pane.
Click Disable Console.
Click OK in the warning message.
Your new preferred console is displayed automatically each time you log on.
Administration
2-11