Kyocera KM-F1050 User Manual page 102

Renew Counters
counters in the printing devices are not changed.
Report
device group. A report shows you its subscribers and the groups it reflects, including
any inheritance.
Report Subscription
finalized, it is sent in an e-mail to the subscriber.
Role
user account.
S Secure Job Release
PIN number for all print jobs sent to a printing system, or directs the print driver to
prompt for a PIN number for every print job.
Service Status
use to stop or start the KMnet Admin Web service. The service must be stopped to
configure the service, as well as install, configure, or remove components.
SNMP
managing IP network devices, including printing devices. SNMP settings determine
the level of security and prevent unauthorized printing to the SNMPv3 printing device.
SNMP Community String
communities -- the Read Community and the Write Community. To enable
management communication, use the same community strings that are configured on
the agent.
SNMP Traps
an error occurs.
Special Alert
that is due for scheduled maintenance.
Status Filter
fitting a particular status qualification.
Status Polling
device.
Subscribers Only User
Admin. These users are authorized to receive alerts and reports by e-mail.
Subscription
alerts or reports by e-mail.
sysLocation
office.
Tab
T
Trap
program. In this manual, "trap" refers to any unsolicited alert triggered by a specific
device condition, such as a paper jam.
x
A function that resets all KMnet Admin counters to zero. The
A scheduled communication that reflects a particular set of properties for a
A subscription to a particular report. When the report is
The set of responsibilities and permitted actions assigned to a KMnet Admin
A feature configured in the Job Release plug-in that sets a
A control in the KM Service Manager that an administrator can
Simple Network Management Protocol. The standard TCP/IP protocol for
Unsolicited notifications sent from the printing device, usually when
An alert triggered either by an unresponsive device or by a device
A function of Device Manager that allows you to view only devices
A type of polling that gathers only status information from each
An arrangement for a user account to receive certain KMnet Admin
A user-defined property that reflects a device's physical location in an
A set of ordered columns containing data collected by KMnet Admin.
A program interrupt, usually caused by some unexpected situation within the
A text string that acts as a password. There are two
A user account without the ability to log on to KMnet
User Guide