Table of Contents
Advertisement
Multi-Set
Changing Accounting Settings on Multiple Devices
1
2
3
4
5
6
7
8
Set Polling Schedule
KMnet Admin 2.0
The Multi-Set function can set accounting parameters remotely for multiple
devices. Using this wizard, you can make global changes to groups of devices,
such as to prevent anonymous printing, or to set or relax printing limits.
Use the wizard to change accounting settings for one or more devices. The
wizard can make changes to devices in the selected group. If no device is
selected, then the wizard provides a device selection step.
There are two buttons that launch the wizard:
Multi-Set Accounting Device Group button
Located in the toolbar above the left side pane. If no group is selected, this
button is unavailable.
Multi-Set Accounting Devices button
Located in the toolbar above the right side pane. If no devices are selected,
then the wizard will provide a device selection step.
Follow the instructions in the wizard to change settings on multiple devices.
Click the Multi-Set button on a toolbar. Click Next .
Select the devices to make changes to, if they were not already selected. Use
the shift and control keys to select one or more devices. Click Next.
Make selections from the menus for each setting that you want to change.
Select the accounts to be modified.
Choose a time for performing the Multi-Set operation. Click Next.
Confirm the settings.
Note: Even if the job is scheduled to start at a later time, the job cannot be
cancelled after you click the Finish button.
Click Finish .
If Now was selected, a progress window will appear. If an error occurs, a status
report window will appear.
You can set a schedule for KMnet Admin to obtain counter information from all
devices in a group. For the All Devices group, the default schedule is every 3
hours. Other groups do not have polling set by default.
You can poll the devices of the selected group at any time by clicking Refresh.
Accounting Manager
4-8
Hide quick links:
Advertisement
Table of Contents
