Table of Contents
Advertisement
Print Job Manager
9
10
11
Configure Queues
Configuring Queues
1
2
3
Consoles
Choosing a Console
5-14
In the Stop saving print jobs if disk space drops below x Mb text box, type a
disk space amount, in megabytes. The application will stop saving completed
print jobs if server free space drops below this setting. The minimum setting is 0
MB, and the maximum is 512 MB.
To save your settings and close the Queue Management dialog box, click OK.
In KM Service Manager, click Start to start the service again, and then click
Close.
In the Configure Queues dialog box of the KM Service Manager,
administrators can select queues for management or remove queues from
management. Managed queues appear and are tracked in the Print Job
Manager and My Print Jobs. Unmanaged queues are not displayed or tracked,
however, unmanaging a queue does not remove it from the application—the
queue is marked as inactive. Page counts and reports remain available for
unmanaged queues.
The Config Queues feature lets you move queues between Managed Queues,
and Unmanaged Queues. Managed queues are tracked by the application.
Unmanaged queues exist on the print server, but they are not tracked by the
application.
The Configure Queues dialog box appears. The first time you open the dialog,
all printing systems connected to TCP/IP on the server with Host Agent are
listed in the left pane under Unmanaged Queues.
To move a queue from the Unmanaged Queues list to the Managed Queues
list, click to select a printing system in the left list, then click the right arrow. To
move a queue from the Managed Queues list back to the Unmanaged Queues
list, click to select a printing system in the right list, then click the left arrow.
When you are finished managing queues, click OK to save your changes and
close the Configure Queues dialog. Queues moved to the Managed Queues
list will now appear and are tracked in Print Job Manager and My Print Jobs.
Consoles lets you disable or enable selected consoles. When a console is
disabled, you cannot use it to retrieve information from network printing devices.
All information received previously is saved in the KMnet Admin database.
Once disabled, you can enable the console again from the Administration
console. The Administration and Device Manager consoles cannot be
disabled.
To disable or enable consoles, select the Administration console and click
Consoles in the navigation area. The Disable Console and About buttons
appear at the top of the right pane. The Disable Console button is unavailable
until you select a console that can be disabled.
You can choose a console when logging on to KMnet Admin, and you can
change to a different console at any time.
User Guide
Hide quick links:
Advertisement
Table of Contents
