Kyocera KM-F1050 User Manual page 51

Device Properties for Multiple Devices
KMnet Admin 2.0
Updates the toner display in the Supplies tab.
Note: Default polling settings are used for all devices unless you change
the settings for individual devices. The administrator can set default polling
settings. If Traps are enabled, we recommend reducing the frequency of
KMnet Admin Status polling.
Traps
Traps are unsolicited notifications sent from the printing device, usually when
an error occurs. Click each link to open a separate window:
What are Traps?
Explains the difference between traps and polling and why you should use
both methods.
How to set up Traps?
Explains how to configure the device's trap settings.
Connect to the device
Opens the device's Home Page or Command Center. Follow the
instructions in How to set up Traps to configure the trap settings.
SNMP
A user with privileges can change Simple Network Management Protocol
communications settings.
Retries
Type the number of times, after an initial failure, to attempt to establish
SNMP communication with the printing device, up to 5 times. A higher
number increases network traffic, while a lower number can improve
performance.
Timeout
Type the time the server should wait for the printing device to respond to an
SNMP request, from 2 to 30 seconds.
Read Community
Type the printing device's Read Community name for requesting information.
Write Community
Type the printing device's Write Community name for changing
configurations.
Device Properties options lets you view and set the properties of printing
devices. The Properties dialog box displays detailed information about the
selected network device. Some models do not display all options.
Options for Multiple Devices
The Multiple Device Properties dialog box displays polling and SNMP
communications settings that can be changed for all selected devices at once.
Select the Manager these devices check box to enable polling options. The
check box changes depending on settings of the selected devices.
Checked
All selected devices are managed.
Shaded
Device Manager
3-29