Changing The Default Console; Log Off - Kyocera KM-F1050 User Manual

1
2

Changing the Default Console

1
2
3

Log Off

KMnet Admin 2.0
If you select Choose a console to open when logging on, you must then select
a console from the list. The console you chose is displayed. You must select a
console from the list each time you log on this way.
If you installed all of the consoles, the available choices are:
Administration
A console for managing user accounts/roles, network discovery, and system
settings.
Device Manager
A console for managing device data, polling, alerts, and preferences.
Accounting Manager
A console for monitoring the various counters on your network printing
devices.
Print Job Manager
A console for print queue management and job control.
To choose a console:
In any console, click Switch Consoles.
Select the desired console from the list.
If you select Open the default console and log on to KMnet Admin, your
preferred console is displayed. By default, the preferred console is set to
Device Manager.
To change the default console:
Log on to KMnet Admin.
In the navigation area, click Switch Console, then select a default console.
Click Switch Console, then click Set As Default Console.
Your new preferred console is displayed each time you log on.
To log off from the application, in the navigation area, click Switch Console,
then select log off.
A user is automatically logged off if the software is not used for 30 minutes.
Print Job Manager
5-15