Deleting A Network; Network Properties - Kyocera KM-F1050 User Manual

3

Deleting a Network

1
2
3
4
5

Network Properties

KMnet Admin 2.0
Type the Domain. This text box is available only if the Device Communication
option in the Administration console is set to Device IP addresses are
volatile and may change. The network domain is applied to a device's domain
field when the device is first discovered. For more information, see Device
Communication. Click Next.
Deleting a network does not delete the devices on that network.
In the navigation area, select Networks and Discovery.
Select a network.
Click Delete Network.
Select Unmanage all devices on the selected network(s) if you wish to
suspend all polling of these devices by all consoles.
Devices that do not belong to any registered network will appear in the All
Devices\Networks\Orphans folder.
Whether or not the network or networks include any devices, click OK in the
confirmation message.
You can view properties for the selected network by clicking Network
Properties.
General Tab
On the General tab, you can modify all properties for the selected managed
network except the network address and the subnet mask. If you clear the
Managed check box, click OK to confirm This will unmanage all devices on
this network, thus suspending all polling of these devices by all consoles.
Are you sure you want to do this?
When a network is unmanaged:
Discovery is disabled.
You cannot modify any network property except for the alias.
You may create orphan devices.
Note: Devices that do not belong to any registered network will appear in the
All Devices\Networks\Orphans folder.
SNMP v1/v2c v3 Tab
Select the SNMP v1/v2c v3 tab to view and modify the SNMP options for the
selected network.
Discovery Tab
Select the Discovery tab to view and modify the device discovery schedules for
the selected network.
Administration
2-7