Subscription View; Adding Devices - Kyocera KM-F1050 User Manual

Subscription View

Adding Devices

1
2
3
4
5
KMnet Admin 2.0
Note: If multiple users make simultaneous changes to a group's Map View
settings, the last user to save changes override all other users' previously
saved changes.
Printing devices are polled for information, and e-mail alerts can be sent out
based on this status information. You can also generate reports, and users can
subscribe to receive these reports on a regular schedule.
For example, a user can be notified when toner or paper is low in a particular
device.
Alert e-mails can be sent to any user. In addition to Administrators, Help Desk
users, and Accounting Users, Subscribers Only users can be added who do
not have access to KMnet Admin but can receive e-mail alerts.
Reports are created in the Device Manager console. Subscriptions to reports
can be created in the Administration or Device Manager console.
Alerts can be created for all the different types of users. Login users can log on
and edit settings. Subscribers Only users cannot log on and can only receive
alerts and reports from devices.
A user must have at least one e-mail address listed to subscribe to alerts or
reports.
Note: If pop-up blockers are enabled, Add Alert Subscription, Add Report
Subscription, Device Manager Report, the About page, and Help will not
open.
A printing device that is not automatically displayed can be added manually to
the list of devices. For example, the device may be located on a remote network
that is not set up for automatic discovery. You can add a device to the list of
devices.
In List View or Map View, click Add Device.
In the Add Devices dialog box, type the printing device's IP address or
hostname.
Click Add. The added device appears in the Selected targets list.
You can also copy IP addresses or hostnames and click Paste. The added
device or devices appear in the Selected targets list. You may receive a
message to allow access to the clipboard, click Allow access on this dialog
box.
Click OK to submit the Selected targets list. An Add Devices Result dialog
box appears with a status of all the devices submitted. A Details link refers you
to the device's IP address or hostname for each device submitted.
You can click Remove to delete any devices in your Selected targets list, or
Cancel to exit the Add Devices feature.
Device Manager
3-13