Chapter 6 Hardware Maintenance; Required Tools; Removing And Installing A Power Module - 3Com LS8M1P12TEH Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches

Chapter 6 Hardware Maintenance

Caution:
The power modules of the S7500 series are hot-swappable.
When installing or replacing a power module with the switch powered on, do not
touch any naked wire, terminal, or any part of the product labeled with a high voltage
hazard warning to avoid bodily injury.

6.1 Required Tools

ESD-preventive wrist strap
Screwdriver

6.2 Removing and Installing a Power Module

Figure 6-1 Install a power module
Chapter 6 Hardware Maintenance
1
6-1
2