Check After Power-On (Recommended); Startup Process - 3Com LS8M1P12TEH Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches
Caution:
Before powering on the switch, locate the position of the power switch for the
equipment room where you will operate so that you can switch off the power supply
promptly in case of any accident
5.2.2 Power-on
Turn on the power to the system.
Turn on the power switch on the system.

5.2.3 Check after Power-on (Recommended)

After powering on the switch, check that:
The cooling system works normally. You can hear the fans rotate and feel airflows
out of the vent.
The system LEDs on the SRPU work normally.
After that, make corresponding configurations.

5.2.4 Startup Process

As the switch is started, the following information will be output on the configuration
terminal:
Note:
The following information may vary with switch models.
Copyright(c) 2004-2007 Hangzhou H3C Tech. Co., Ltd.
Creation date
CPU type
CPU Clock Speed : 300Mhz
BUS Clock Speed : 33Mhz
******************************************
*
* H3C S7506 BOOTROM, Version 530
*
******************************************
: Apr 20 2007, 14:48:52
: MPC8245
5-6
Chapter 5 System Commissioning
*
*
*