3Com LS8M1P12TEH Installation Manual page 256

Installation Manual
H3C S7500 Series Ethernet Switches
Side panels are necessary for both ends of a row of cabinets. Side panels fall in left
ones and right ones. A pair of side panels needs to be installed at both ends of a row of
cabinets. They are installed at both sides of the cabinet columns.
Figure B-55 shows the installation of a side panel. The following table describes the
operation procedures:
Table B-14 Install a side panel
Step
1
2
3
Figure B-55 Install a side panel
4) Install front and back doors
Front doors and back doors are the same. They are of the dual-door structure.
Figure B-56 shows the installation of a front/back door. The following table describes
the operation procedures:
Loosen M6 bolts used to connect the side panel on the cabinet column,
and then put the side panel between the door lintel and the column.
Set the socket of the side panel onto the pin (M6 bolt) from above the pin,
and then install the side panel into the open socket of the installation rack.
Align the side panel with the installation holes, and then fasten four M6
countersunk screws to fasten the side panel with a flathead screwdriver.
Cabinet column Cabinet column
Appendix B N68 Cabinet Installation
Operation
B-58
Pin Pin
Socket Socket
M6 countersunk screw M6 countersunk screw