Panel And Leds - 3Com LS8M1P12TEH Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches
Note:
When using the LS81T32P as an LPU of the S7503/S7506/S7506R switch, you can
only use it together with a Salience III or Salience III Plus SRPU.
If you use the LS81T32P together with a Salience III Plus SRPU, you can insert it
into any LPU slot on the S7503/S7506/S7506R.
If you use the LS81T32P together with a Salience III SRPU, you can only insert it
into one of the last two LPU slots on the S7503/S7506/S7506R (slot 2 or 3 for the
S7503, slot 5 or 6 for the S7506, and slot 6 or 7 for the S7506R).

2.16.2 Panel and LEDs

Figure 2-44 LS81T32P panel
(1) Silkscreen of the LPU name
(3) LPU edge (green)
(5) 1000Base-X-SFP port status LED
(7) 10/100/1000Base-T Ethernet port
Figure 2-45 Partially amplified view of the LS81T32P panel
The following table describes the LED of the LS81T32P:
Chapter 2 Line Processing Units
(2) Captive screw
(4) Ejector lever
(6) 1000Base-X-SPF port
2-35