3Com LS8M1P12TEH Installation Manual page 243

Installation Manual
H3C S7500 Series Ethernet Switches
(1) Bolt M12x60
(4) Expansion tube
Figure B-43 Assemble supports and guide rails
In case of combining a row of cabinets, you must adjust the positions of the supports
before fixing them. The front ends of the supports should be in the same line. The
spacing between adjacent supports should be 128 mm (5.0 in.), as shown in
Figure B-44.
Figure B-44 Position relationship of the supports
(2) Spring washer 12
(5) Expansion nut
B-45
Appendix B N68 Cabinet Installation
(3) Flat washer 12
1
2
3
4
5