A.b.s Function "A.b.s - FUTABA 3PKS Instruction Manual

A.B.S Function "A.B.S"

When the brakes are applied while cornering with a 4 Wheel
Drive or other type of vehicle, understeer may occur. The gen-
eration of understeer can be eliminated and corners can be
smoothly cleared by using this function.
Operation
- When the brakes are applied, the throttle servo will pulse
intermittently. This will have the same effect as pumping
the brakes in a full size car.
- The brake return amount, pulse cycle, and brake duty can
be adjusted.
- The region over which the ABS is effective can be set ac-
cording to the steering operation. (Mixing function)
Operation display
During ABS operation, the LED blinks, (If LED color is not selected as off).
display also appears on the initial screen and menu screen.
When "TRG-BRK" was set to "CUT OFF" by boat mode function
When "CUT OFF", which prohibits trigger brake side operation, was set in the boat
mode (p.72), the ABS function will not actually operate even if set.
Calling the setup screen
*Calling from menu screen
(Opening Screen)
Menu screen call
by
MENU 1
MENU1/2 selection
by button
MENU 2
Select the function
by button
Press t he button
* When the direct call button is set,
the setup screen is also called by the
following method:
(Opening Screen)
Press t
he
DIRECT SEL
Press the button set
at this function.
•Select the setting item by
* b l i n k s a t t h e c u r r e n t
setup item.
button
button
A.B.S Function "A.B.S"
button
(Throttle system)
Without A.B.S.
With A.B.S.
Setup items
ABP : Brake return amount
DLY : Delay amount
CYC : Cycle speed
MODE : Function ON/Off
TGP : Operation point
DTY : Cycle duty ratio
STM : Steering mixing
When brake operation enters
the set range, " " is displayed in
front of the number.
ATL (brake) rate can be confirmed
on the A.B.S function screen.
A bar graph that shows the
operating position of the
throttle appears. During set-
up, A.B.S function operation
can be checked at this bar
graph.
65